Thread (14 messages) 14 messages, 5 authors, 2008-06-19

RE: linux 2.6 hangs at __delay function on Viretx 4 board

From: Howard, Marc <hidden>
Date: 2008-06-04 21:44:40

Every year at the Embedded Systems Conference I would complain to the
Xilinix folks about the 16550 not being free.  This year I complained &
they told me that even though it is listed as a purchased core when you
go to "buy" it you get it for free.  This was just prior to the 10.x
release.

Marc W Howard=20
-----Original Message-----
From:=20
linuxppc-embedded-bounces+marc.howard=3Dkla-tencor.com@ozlabs.or
g [mailto:linuxppc-embedded-bounces+marc.howard=3Dkla->
tencor.com@ozlabs.org] On Behalf Of John Linn
Sent: Wednesday, June 04, 2008 2:23 PM
To: Peter Korsgaard; swamydp
Cc: linuxppc-embedded@ozlabs.org
Subject: RE: linux 2.6 hangs at __delay function on Viretx 4 board
=20
Hi Peter,
=20
Yes you need to enable UARTLITE as the console in the kernel
configuration.
=20
You have the command line syntax, ttyUL0, correct.
=20
They have now changed the UART 16550 to be a free core in the EDK, not
sure which version of the EDK that happened.
=20
Thanks,
John
=20
-----Original Message-----
From: linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org] =
On
Behalf Of Peter Korsgaard
Sent: Wednesday, June 04, 2008 2:56 AM
To: swamydp
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: linux 2.6 hangs at __delay function on Viretx 4 board
=20
quoted
quoted
quoted
quoted
quoted
"swamydp" =3D=3D swamydp  [off-list ref] writes:
=20
 swamydp> Hi John
=20
 swamydp> I am using UARTLITE as serial console. I do not have license
 swamydp> for UART 16550.  I have enabled the drivers for uartlite in
 swamydp> menuconfig while configuring the kernel. I have tested all
 swamydp> combinations for the kernel command line - tty0, ttyUL0,
 swamydp> ttyl0, ttyS0 but could not get uartlite to output kernel
 swamydp> printk messages.
=20
Correct syntax is console=3DttyUL0
=20
 swamydp> Since I am using uartlite , the following settings are
 swamydp> turned off in menuconfig
=20
 swamydp> CONFIG_SERIAL_8250=3Dn
 swamydp> CONFIG_SERIAL_8250_CONSOLE=3Dn
=20
Do you have console on uartlite (CONFIG_SERIAL_UARTLITE_CONSOLE)
enabled?
=20
--=20
Bye, Peter Korsgaard
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
=20
This email and any attachments are intended for the sole use=20
of the named recipient(s) and contain(s) confidential=20
information that may be proprietary, privileged or=20
copyrighted under applicable law. If you are not the intended=20
recipient, do not read, copy, or forward this email message=20
or any attachments. Delete this email message and any=20
attachments immediately.
=20
=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help