I don't know, I'm not familiar with what you are doing and it's not clear from the message.
 
-- John

________________________________

From: rodolfo [mailto:rodolfo@lesc.ufc.br]
Sent: Wed 5/28/2008 12:05 PM
To: John Linn
Cc: Mirek23; linuxppc-embedded@ozlabs.org
Subject: RE: Cross toolchain for ppc405 (virtex-4)



Hi Jonh,

If I use ml403 (with PPC 405) Did i change the predefined compiler flags
for ppc_4xx? The default value is -mcpu=403.

On Wed, 28 May 2008 11:16:41 -0600, "John Linn" [off-list ref]
wrote:

Hi Miroslaw,

I'm not sure on what version of gcc and glibc it's using, but I have been
using ELDK 4.1 from denx.com. There are newer versions.

Thanks,
John



-----Original Message-----
From: linuxppc-embedded-bounces+john.linn=xilinx.com@ozlabs.org on behalf
of Mirek23
Sent: Wed 5/28/2008 9:54 AM
To: linuxppc-embedded@ozlabs.org
Subject: Cross toolchain for ppc405 (virtex-4)


Hi All,

I am using for some time the crosstool tool-chain (crosstool-0.43) for

the

ppc405 of my virtex-4.
It seems to be that the crosstool was not updated for awhile but the

glibc

and gcc compiler has changed a bit meanwhile.

The latest working configuration to build the toolchain for ppc405 is
gcc-4.1.0-glibc-2.3.6.dat
Does any body has tried to adapt the crosstools to use for example glibc
2.7
?

Another alternative would be to use another tool than crosstool. Could
somebody recommend something which can refer to newer version of gcc and
glibc .

Best Regards

Miroslaw Dach

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.