Re: powerpc port for sbc8260-based board problem

Hallo.

I had the same problem.
The following patch can help.

diff -pruN paulus-git/drivers/serial/cpm_uart/cpm_uart_core.c linuxppc-2.6.=
24-ids8247/drivers/serial/cpm_uart/cpm_uart_core.c

--- paulus-git/drivers/serial/cpm_uart/cpm_uart_core.c	2008-03-28 11:03:32.=

000000000 +0100

+++ linuxppc-2.6.24-ids8247/drivers/serial/cpm_uart/cpm_uart_core.c	2008-05=
-07 19:35:21.000000000 +0200

@@ -1350,6 +1349,9 @@ static int __init cpm_uart_console_setup
 	uart_set_options(port, co, baud, parity, bits, flow);
 	cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);

=20
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+	cpm_set_brg(pinfo->brg - 1, baud);
+#endif
 	return 0;
 }
=20
Regards
Sergej.

Am Mittwoch, den 07.05.2008, 01:31 -0700 schrieb Boris Shteinbock:

Hi.
I am doing a port from ppc to powerpc ARCH on sbc8260 based board.
The problem is, that I can't get  SMC1 UART to work.
After SMC console  is initialized. =20
cpm_uart_console_write() hangs here
=20
        /* Wait for transmitter fifo to empty.
         * Ready indicates output is ready, and xmt is doing
         * that, not that it is ready for us to send.
         */
        while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) !=3D 0)
            ;
=20
I am using dts tree modified  from ep8248 port since it is the only one t=

hat has smc description in it. :

=20
=20
     brg@119f0 {
       compatible =3D "fsl,mpc8260-brg",
                    "fsl,cpm2-brg",
                    "fsl,cpm-brg";
       reg =3D <119f0 10 115f0 10>;
       clock-frequency =3D <135000000>;
      =20
     };
=20
     /* Monitor port/SMC1 */
     smc1: serial@11a80 {
       device_type =3D "serial";
       compatible =3D "fsl,mpc8260-smc-uart",
                    "fsl,cpm2-smc-uart";
       reg =3D <0x11a80 0x20 0x1100 0x40>;
       interrupts =3D <4 8>;
       interrupt-parent =3D <&PIC>;
       fsl,cpm-brg =3D <1>;
       fsl,cpm-command =3D <0x1d000000>;
       linux,my-label =3D "SMC1";
     };
=20
I checked a BRG settings against working u-boot configuration and they ar=

e the same. Anyway a wrong BRG setting wouldn't hang this loop

=20
So I have a few questions.
If someone has done sbc8260 dts tree and port to "powerpc" already, I'd b=

e very  grateful if he can share it with me.

I couldn't find anything on the internet.
=20
Can someone, also, explain, how "fsl, cpm-command" field works,  booting-=

without-of document doesn't provide much information.

I feel, that just copying this value from ep8248.dts isn't right somehow.
=20
Thank you
=20
=20
      ___________________________________________________________________=

_________________

Be a better friend, newshound, and=20
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_y=

lt=3DAhu06i62sR8HDtDypao8Wcj9tAcJ

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

--=20
Dipl.-Ing. Sergej Stepanov=20
Software-Entwicklung

IDS GmbH=20
E-PA  (Entwicklung - Prozess Automatisierung)
Nobelstr. 18,=20
D-76275 Ettlingen=20
T. (0) 72 43/2 18-615=20
F. (0) 72 43/2 18-100=20
E. Sergej.Stepanov@ids.de

<http://www.ids.de>
Gesch=C3=A4ftsf=C3=BChrer: Norbert Wagner, Friedrich Abri=C3=9F=20
Sitz der Gesellschaft: Ettlingen=20
Amtsgericht Mannheim HRB 362503=20