RE: [PATCH] Xilinx: hwicap: cleanup polling timeout.
flat view
From: Stephen Neuendorffer <hidden>
Date: 2008-05-06 18:26:55
Not really... In this case 'faster' means 'faster ICAP core' not 'faster processor': This is really something that is bounded by the number of cycles. Steve
-----Original Message----- From: <redacted> [mailto:<redacted>] On Behalf Of
Grant Likely
Sent: Monday, May 05, 2008 1:01 PM To: Stephen Neuendorffer Cc: <redacted> Subject: Re: [PATCH] Xilinx: hwicap: cleanup polling timeout. =20 On Mon, May 5, 2008 at 12:20 PM, Stephen Neuendorffer [off-list ref] wrote:quoted
In order to avoid polling forever if an error occurs, this driver includes a timeout counter. However, in fast systems, this counter wasn't high enough. This patch fixes the bug and also makes the buffer-based and fifo-based drivers return the same error condition
on
quoted
a timeout (-EIO).=20 Would it be better to base the timeout on real time instead of a hard iteration count? =20 Cheers, g. =20quoted
Signed-off-by: Stephen Neuendorffer
[off-list ref]
quoted
--- drivers/char/xilinx_hwicap/buffer_icap.c | 10 ++++++++-- drivers/char/xilinx_hwicap/fifo_icap.c | 9 +++++++++ drivers/char/xilinx_hwicap/xilinx_hwicap.h | 3 --- 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c
b/drivers/char/xilinx_hwicap/buffer_icap.c
quoted
index aa7f796..0993883 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -35,6 +35,12 @@ #include "buffer_icap.h" +/* Number of times to poll the done register. This has to be
large
quoted
+ enough to allow an entire configuration to complete. If an
entire
quoted
+ page (4kb) is configured at once, that could take up to 4k
cycles
quoted
+ with a byte-wide icap interface. */ +#define XHI_MAX_RETRIES 5000 + /* Indicates how many bytes will fit in a buffer. (1 BRAM) */ #define XHI_MAX_BUFFER_BYTES 2048 #define XHI_MAX_BUFFER_INTS (XHI_MAX_BUFFER_BYTES >> 2) @@ -208,7 +214,7 @@ static int buffer_icap_device_read(struct
hwicap_drvdata *drvdata,
quoted
while (buffer_icap_busy(base_address)) { retries++; if (retries > XHI_MAX_RETRIES) - return -EBUSY; + return -EIO; } return 0; @@ -242,7 +248,7 @@ static int buffer_icap_device_write(struct
hwicap_drvdata *drvdata,
quoted
while (buffer_icap_busy(base_address)) { retries++; if (retries > XHI_MAX_RETRIES) - return -EBUSY; + return -EIO; } return 0; diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c
b/drivers/char/xilinx_hwicap/fifo_icap.c
quoted
index 776b505..d1cd928 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -35,6 +35,15 @@ #include "fifo_icap.h" +/* Number of times to poll the done register. This has to be
large
quoted
+ * enough to allow an entire configuration to complete. If an
entire
quoted
+ * page (4kb) is configured at once, that could take up to 4k
cycles
quoted
+ * with a byte-wide icap interface. In most cases, this driver is + * used with a much smaller fifo, but this should be sufficient in
the
quoted
+ * worst case. + */ +#define XHI_MAX_RETRIES 5000 + /* Register offsets for the XHwIcap device. */ #define XHI_GIER_OFFSET 0x1C /* Device Global Interrupt
Enable Reg */
quoted
#define XHI_IPISR_OFFSET 0x20 /* Interrupt Status Register */ diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.hb/drivers/char/xilinx_hwicap/xilinx_hwicap.hquoted
index 1f9c8b0..fd4be31 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -89,9 +89,6 @@ struct hwicap_driver_config { void (*reset)(struct hwicap_drvdata *drvdata); }; -/* Number of times to poll the done regsiter */ -#define XHI_MAX_RETRIES 10 - /************ Constant Definitions *************/ #define XHI_PAD_FRAMES 0x1 -- 1.5.3.4-dirty=20 =20 =20 -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.