Scott Wood wrote:

Rune Torgersen wrote:

quoted

Hi
I get the following oops when trying to boot a arch/powerpc kernel
with preempt-rt installed (v2.6.25.4-rt1)
The board is using a Freescale 8280 as the main CPU and a Silicon
Image SII3124 SATA controller. The oops seems to happen on
fileaccess right after init starts.

[snip]

quoted

NIP [c0249618] rt_spin_lock_slowlock+0x9c/0x200
LR [c02495ec] rt_spin_lock_slowlock+0x70/0x200
Call Trace:
[ef29d600] [c02495ec] rt_spin_lock_slowlock+0x70/0x200 (unreliable)
[ef29d670] [c00277d0] lock_timer_base+0x2c/0x64
[ef29d690] [c00285e8] del_timer+0x2c/0x78
[ef29d6b0] [c019d108] scsi_delete_timer+0x1c/0x3c
[ef29d6d0] [c01992d0] scsi_done+0x18/0x4c
[ef29d6f0] [c01b19dc] ata_scsi_qc_complete+0x364/0x380
[ef29d720] [c01a8708] __ata_qc_complete+0xd8/0xec
[ef29d740] [c01b011c] ata_qc_complete_multiple+0xc4/0xec
[ef29d760] [c01bcaf4] sil24_interrupt+0x46c/0x52c
[ef29d7a0] [c0048954] handle_IRQ_event+0x64/0x100
[ef29d7d0] [c0048b30] __do_IRQ+0x140/0x1bc
[ef29d7f0] [c00166c4] apmax_int_irq_demux+0x8c/0xb0
[ef29d810] [c0006448] do_IRQ+0x68/0xa8
[ef29d820] [c0010388] ret_from_except+0x0/0x14

--- Exception: 501 at __spin_unlock_irqrestore+0x28/0x4c
    LR =3D __spin_unlock_irqrestore+0x20/0x4c

[ef29d8f0] [c0249600] rt_spin_lock_slowlock+0x84/0x200
[ef29d960] [c00277d0] lock_timer_base+0x2c/0x64

=20
You're recursively entering lock_timer_base, which does a
spin_lock_irqsave().  Either interrupts are enabled when they should
not be, or an interrupt was supposed to be threaded that isn't.

Sort of figured. How do I figure out which one, and how to fix it?
I've never gotten any -rt patchsets to work on this CPU, and it always
seems to be related to the disk driver.
I've tried since 2.6.16 ppc.... (2.6.16, 2.6.18 on ppc, 2.6.24 and 25 on
powerpc)

Even though this is a custom board, I'm pretty sure I can get it to fail
on a pq2fads board with the same disk controller.