[PATCH v2.6.26 1/2] phylib: factor out get_phy_id from within get_phy_device
From: Paul Gortmaker <hidden>
Date: 2008-04-15 16:22:53
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
We were already doing what amounts to a get_phy_id from within get_phy_device, and rather than duplicate this for the TBIPA probing, we might as well just factor it out and make it available instead. Signed-off-by: Paul Gortmaker <redacted> Acked-by: Andy Fleming <redacted> --- drivers/net/phy/phy_device.c | 38 +++++++++++++++++++++++++++++--------- include/linux/phy.h | 1 + 2 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f4c4fd8..8b1121b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c@@ -86,35 +86,55 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) EXPORT_SYMBOL(phy_device_create); /** - * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * get_phy_id - reads the specified addr for its ID. * @bus: the target MII bus * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. * * Description: Reads the ID registers of the PHY at @addr on the - * @bus, then allocates and returns the phy_device to represent it. + * @bus, stores it in @phy_id and returns zero on success. */ -struct phy_device * get_phy_device(struct mii_bus *bus, int addr) +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) { int phy_reg; - u32 phy_id; - struct phy_device *dev = NULL; /* Grab the bits from PHYIR1, and put them * in the upper half */ phy_reg = bus->read(bus, addr, MII_PHYSID1); if (phy_reg < 0) - return ERR_PTR(phy_reg); + return -EIO; - phy_id = (phy_reg & 0xffff) << 16; + *phy_id = (phy_reg & 0xffff) << 16; /* Grab the bits from PHYIR2, and put them in the lower half */ phy_reg = bus->read(bus, addr, MII_PHYSID2); if (phy_reg < 0) - return ERR_PTR(phy_reg); + return -EIO; + + *phy_id |= (phy_reg & 0xffff); + + return 0; +} + +/** + * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, then allocates and returns the phy_device to represent it. + */ +struct phy_device * get_phy_device(struct mii_bus *bus, int addr) +{ + struct phy_device *dev = NULL; + u32 phy_id; + int r; - phy_id |= (phy_reg & 0xffff); + r = get_phy_id(bus, addr, &phy_id); + if (r) + return ERR_PTR(r); /* If the phy_id is all Fs, there is no device there */ if (0xffffffff == phy_id)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5e43ae7..e794c4d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h@@ -361,6 +361,7 @@ struct phy_driver { int phy_read(struct phy_device *phydev, u16 regnum); int phy_write(struct phy_device *phydev, u16 regnum, u16 val); +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
--
1.5.4.3