Re: Performance in Booting Linux w/ Device Tree via U-Boot out of JFFS2 on NAND

On 3/6/08 9:30 AM, Grant Erickson wrote:

I am continuing some experiments in booting Linux w/ a flattened device tree
via u-boot (1.3.2-rc3) from JFFS2 on NAND on an AMCC "Haleakala" board and am
curious if anyone has come up with some quantitative performance
characterizations of the various options (in all cases, u-boot lives on NOR
flash). The options I am evaluating are:

1) Put uImage and haleakala.dtb in their own "raw" NAND slices and boot with
   u-boot nand commands:

[ ... details omitted ... ]

Qualitative performance: Nearly instantaneous.

As expected, in this case the qualitative, subjective time to seeing "Linux
version 2.6.25-rc3-00951-g6514352-dirty ..." is nearly instantaneous.

2) Put uImage and haleakala.dtb as files in /boot in the ~12 MB JFFS2 root
   file system image in the ~60 MB "root" NAND slice and boot with u-boot
   fsload commands:

[ ... details omitted ... ]

2a) With CFG_JFFS2_SORT_FRAGMENTS enabled.

Qualitative performance: Takes the better part of 30-35 minutes.

As expected with the in-documentation warnings about CFG_JFFS2_SORT_FRAGMENTS
and looking at the code in u-boot/fs/jffs2/jffs2_nand_1pass.c, the
qualitative, subjective time to seeing the Linux version banner is slow, slow
and slow.

2b) With CFG_JFFS2_SORT_FRAGMENTS disabled.

Qualitative performance: Takes about 30 seconds to two minutes.

3) This is a hybrid approach that I am setting up right now and is where I am
curious if anyone has done plots of fsload time on JFFS2 + NAND relative to
file system size.

Here, we use a separate 4 MB "/boot" JFFS2 file system for uImage and
haleakala.dtb files and a 60 MB "/" JFFS2 file system for the root file
system.

[ ... details omitted ... ]

3a) With CFG_JFFS2_SORT_FRAGMENTS enabled.

Shouldn't be necessary since the /boot file system would only ever be accessed
read-only and updated by nandwrite, not individual file updates.

3b) With CFG_JFFS2_SORT_FRAGMENTS disabled.

Qualitative performance: TBD <= 2b

For what it's worth, the results of (3b) above with a 4 MB "boot" JFFS2 file
system were the same as (2b) where "/boot" was just a subdirectory of the 12
MB (62 MB total NAND space) "/" JFFS2 file system:

In short, qualitative performance: Takes about 30 seconds to two minutes.

So, with CFG_JFFS2_SORT_FRAGMENTS disabled it would appear that fsload on
JFFS2 is O(1) with respect to one or all of: file system size, inodes or
dirents in the 4 MB to 64 MB range.

Regards,

Grant