Use aliases instead of linux,network-index on Ebony

4 messages, 3 authors, 2008-02-25 · open the first message on its own page

Use aliases instead of linux,network-index on Ebony

From: David Gibson <hidden>
Date: 2008-02-25 00:33:39

This patch alters the Ebony bootwrapper to use the new preferred
method of using aliases to work out which MAC address to attach to
which ethernet device node, rather than the old method based on the
linux,network-index property.

The now obsolete linux,network-index properties are removed from the
ebony device tree as well.  This won't break backwards compatiblity,
because in cases where this fixup code is relevant, the device tree is
part of the kernel image.

Signed-off-by: David Gibson <redacted>

For 2.6.26, tested on an Ebony board with treeboot.

Index: working-2.6/arch/powerpc/boot/ebony.c
===================================================================
--- working-2.6.orig/arch/powerpc/boot/ebony.c	2008-02-25 11:22:31.000000000 +1100
+++ working-2.6/arch/powerpc/boot/ebony.c	2008-02-25 11:23:20.000000000 +1100
@@ -75,7 +75,8 @@ static void ebony_fixups(void)
 
 	ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
 	ibm4xx_sdram_fixup_memsize();
-	dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+	dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
+	dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ebony_flashsel_fixup();
 }
Index: working-2.6/arch/powerpc/boot/dts/ebony.dts
===================================================================
--- working-2.6.orig/arch/powerpc/boot/dts/ebony.dts	2008-02-25 11:25:28.000000000 +1100
+++ working-2.6/arch/powerpc/boot/dts/ebony.dts	2008-02-25 11:25:37.000000000 +1100
@@ -243,7 +243,6 @@
 			};
 
 			EMAC0: ethernet@40000800 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
@@ -263,7 +262,6 @@
 				zmii-channel = <0>;
 			};
 			EMAC1: ethernet@40000900 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: Use aliases instead of linux,network-index on Ebony

From: Josh Boyer <hidden>
Date: 2008-02-25 04:35:39

On Mon, 25 Feb 2008 11:33:39 +1100
David Gibson [off-list ref] wrote:
This patch alters the Ebony bootwrapper to use the new preferred
method of using aliases to work out which MAC address to attach to
which ethernet device node, rather than the old method based on the
linux,network-index property.
I like it.  But do we have this new preferred method documented
somewhere?  Doesn't seem to be in booting-without-of.txt.  It probably
should be added there, and reference to the linux,network-index
property removed if this is really preferred now.  Can you add
something to this patch for that?

josh

Re: Use aliases instead of linux,network-index on Ebony

From: David Gibson <hidden>
Date: 2008-02-25 06:49:40

On Sun, Feb 24, 2008 at 10:34:43PM -0600, Josh Boyer wrote:
On Mon, 25 Feb 2008 11:33:39 +1100
David Gibson [off-list ref] wrote:
quoted
This patch alters the Ebony bootwrapper to use the new preferred
method of using aliases to work out which MAC address to attach to
which ethernet device node, rather than the old method based on the
linux,network-index property.
I like it.  But do we have this new preferred method documented
somewhere?  Doesn't seem to be in booting-without-of.txt.  It probably
should be added there, and reference to the linux,network-index
property removed if this is really preferred now.  Can you add
something to this patch for that?
Hrm.  linux,network-index was mentioned in b-w-o.txt, but to be honest
I don't think it ever belonged there.  It describes a bootloader to
kernel interface, whereas network-index was always a bootwrapper
internal hack, applicable only when the device tree and the fixup code
were built into the one image.

aliases, on the other hand do warrent wider mention, and aren't
mentioned at all in b-w-o.txt, but that's a matter of larger scope
than just getting rid of the network-index hack.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: Use aliases instead of linux,network-index on Ebony

From: Josh Boyer <hidden>
Date: 2008-02-25 11:57:07

On Mon, 25 Feb 2008 17:49:25 +1100
David Gibson [off-list ref] wrote:
On Sun, Feb 24, 2008 at 10:34:43PM -0600, Josh Boyer wrote:
quoted
On Mon, 25 Feb 2008 11:33:39 +1100
David Gibson [off-list ref] wrote:
quoted
This patch alters the Ebony bootwrapper to use the new preferred
method of using aliases to work out which MAC address to attach to
which ethernet device node, rather than the old method based on the
linux,network-index property.
I like it.  But do we have this new preferred method documented
somewhere?  Doesn't seem to be in booting-without-of.txt.  It probably
should be added there, and reference to the linux,network-index
property removed if this is really preferred now.  Can you add
something to this patch for that?
Hrm.  linux,network-index was mentioned in b-w-o.txt, but to be honest
I don't think it ever belonged there.  It describes a bootloader to
kernel interface, whereas network-index was always a bootwrapper
internal hack, applicable only when the device tree and the fixup code
were built into the one image.
That's fine.  But can it you remove reference to it then?
aliases, on the other hand do warrent wider mention, and aren't
mentioned at all in b-w-o.txt, but that's a matter of larger scope
than just getting rid of the network-index hack.
My concern is that people writing new ports will continue to copy DTS
files with linux,network-index in it.  Particularly since it's
recommended in b-w-of.txt, and there is no mentioned alternative.

josh
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help