On Monday 04 February 2008 10:51, Sven Luther wrote:
On Sun, Feb 03, 2008 at 05:29:05PM +0100, Bernhard Reiter wrote:
quoted
Dear linux powerpc Maintainers and Users,
recently I have tried to compile a new kernel on a Debian sarge ppc
system (PowerBook5,6 MacRISC3 Power Macintosh).
This is a G4 based system.
Yes.
quoted
The build system bailed out with
BOOTCC arch/powerpc/boot/4xx.o
cc1: error: bad value (440) for -mcpu= switch
make[1]: *** [arch/powerpc/boot/4xx.o] Fehler 1
I have tracked this a few steps and the attached patch made the compile
for me as my compiler gcc-Version 3.3.5 (Debian 1:3.3.5-13)
cannot produce code for 4xx it seems.
You should normally not need to build the 4xx bootloader part. Make sure
that, i don't know why this happens. Can you look into
arch/powerpc/boot/Makefile, to see what option enables the 4xx build,
and make sure it is disabled in the main config ?
I have tried to do this, but it looks like it is just hardcoded into the
Makefile as you can see from the patch. There is probably more that I do not
understand - thus my report with on the workaround.
Bernhard
--
Managing Director - Owner: www.intevation.net (Free Software Company)
Germany Coordinator: fsfeurope.org. Coordinator: www.Kolab-Konsortium.com.
Intevation GmbH, Osnabrück, DE; Amtsgericht Osnabrück, HRB 18998
Geschäftsführer Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner