If you're starting a new design, I *highly* recommend using EDK9.2 with
MPMC3 and LL_TEMAC.

Using the Wizard in EDK9.2 and using the kernel from git.xilinx.com
everything will work fine out-of-the-box.  Including the ethernet.

I've had troubles with the older (EDK9.1) TEMAC and GigE switches not
syncing correctly.   The LL_TEMAC in EDK9.2 solved this issue.



RJW.



On Sun, 2008-01-27 at 20:25 -0800, Yedu Jathavedan wrote:

quoted

Looking at your bootlog, it doesn't look like you've got the systemace
driver built into the kernel.

Grant,

Yes, the systemace was not built into the kernel. It is successfully  
booting the kernel now.
Trying to bring up the Ethernet interface. Any pointers?

Thank you,
Yedu
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded