RE: In PowerPC's feature, are there any difference between ML410 and ML403?

There shouldn't be a significant different in the cores themselves, =
however, there are many ways to get the FPGA design slightly wrong where =
it won't boot, or to get the kernel xparameters file out of synch with =
the FPGA design.  This is most likely your problem.

Steve

-----Original Message-----
From: linuxppc-embedded-bounces+stephen=3Dneuendorffer.name@ozlabs.org =

[mailto:linuxppc-embedded-

bounces+stephen=3Dneuendorffer.name@ozlabs.org] On Behalf Of diak sim
Sent: Thursday, January 10, 2008 5:56 AM
To: linuxppc-embedded@ozlabs.org
Subject: In PowerPC's feature,are there any difference between ML410 =

and ML403?

=20
Hello everyone,
=20
I am using ML410 to port a Linux 2.6 kernel, but init_IRQ() doesn't =

pass.

Porting Linux 2.6 to ML403 is successful? No such a problem?
In PowerPC's feature, are there any difference between ML410 and =

ML403?

=20
Thanks.
=20
=20
________________________________
=20
=

=D1=C5=BB=A2=D3=CA=CF=E4=B4=AB=B5=DD=D0=C2=C4=EA=D7=A3=B8=A3=A3=AC=B8=F6=D0=
=D4=BA=D8=BF=A8=CB=CD=C7=D7=C5=F3=A3=A1 =
<http://cn.mail.yahoo.com/gc/index.html?entry=3D5&souce=3Dmail_mailletter=
_tagline>