Control not branching to the instruction present at resetvec i.e 0xfffffffc

Ravi,

If you already have BDI2000, why don't you single step on it?

Thanks
Siva


Date: Sat, 5 Jan 2008 06:19:05 -0800 (PST)
From: Misbah khan <redacted>
Subject: Re: Control not branching to the instruction present at
	resetvec	i.e 0xfffffffc
To: linuxppc-embedded@ozlabs.org
Message-ID: [ref]
Content-Type: text/plain; charset=3Dus-ascii


Hi Mr Ravi ...
I suggest you to post a new concern in a new thread ....

----Misbah=20

ravi.rao wrote:

=20
Hi All,
    We have a custom target board based on PPC-EP405. We just got the=20
board from the hardware team .I connected the board to BDI200 and

powered=20

it on.=20
The control came to the resetvec address which is 0xfffffffc. I was

able=20

to read and write to flash. So I erased the flash and burnt the

bootloader=20

into flash from 0xfffc0000.
I verified that the instruction at 0xfffffffc is 4bfc2104 whicis

actually=20

a branch to 0xfffc2100. Also a memory dump of 0xfffc2100 shows the

correct=20

code. This proved that
the uboot bootloader was burnt properly.
Now when I reset the board the control never reaches 0xfffc2100 i.e

for=20

some reason the code at the resetvec is not getting executed. Any help

or=20

pointers to resolve this is greatly appreciated.
Thanks,
Ravishankar Govindarao
RFL Electronics Inc.
E-mail : Ravi.Rao@rflelect.com
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863
=20