Re: mpc8568e-mds: pci-e is broken

On Jan 23, 2008, at 1:50 PM, Anton Vorontsov wrote:

On Wed, Jan 23, 2008 at 01:42:56PM -0600, Kumar Gala wrote:
[...]

quoted

quoted

PCI: Probing PCI hardware
PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring
class.
PCI: Closing bogus Apple Firmware region 1 on bus 0x02
PCI: Closing bogus Apple Firmware region 2 on bus 0x02

odd, you shouldn't see these anymore w/my git tree.

Yup, I noticed few commits that are trying to fix this. And these
fixes do work for PCI, but not for PCI-E...

I see these now.. I think I'm too lazy to think of a way to fix this.

[...]

quoted

quoted

static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
{
...
		if (i >= 3 && bus->self->transparent)
			continue;
...
}

That new check doesn't work, here bus->self->transparent == 0.
Could it be that the message below is the root cause?

PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring
class.

this is expected but of how FSL hw reports itself.

Well. I see only two places were transparent flag is applied:
drivers/pci/quirks.c:quirk_transparent_bridge()
and
drivers/pci/probe.c:pci_setup_device() in the PCI_HEADER_TYPE_BRIDGE.

So, obviously probe.c is skipping our PCI-E, thus not setting
transparent flag, no?

quoted

quoted

I.e. drivers/pci/probe.c just don't setting transparent flag.
I wonder if we need use quirk_transparent_bridge() here or
we can fix it other way?

Just in case, I'm observing that message for a long long time, and
it didn't tell upon any functionality till now.

Is this with the 8568 MDS in standalone or plugged into the back  
pane?

This is standalone setup.

do you have a card plugged in?

- k