Re: [PATCH] MTD for Taco

On Monday 14 January 2008, Sean MacLennan wrote:

Josh Boyer wrote:

quoted

But did you go back and verify the EBC settings were correct on your
board?  This shouldn't be needed at all if the EBC bank settings and
timings are correct.

josh

In the EBC0_CFG register we set the RTC (Ready Timeout Count) to 0 and
the sequoia uses 7. Also we set the EMS (External Master Size) to none
and the sequoia sets it to 8 bit.

This is in uboot, the dts are basically the same.

And the EBC0_BxCR & EBC0BxAP registers for the CS where the NAND is connected? 
How are they configured?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office@denx.de
=====================================================================