Re: [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board.
From: David Gibson <hidden>
Date: 2008-01-10 02:06:44
On Wed, Jan 09, 2008 at 12:49:31AM -0500, Paul Gortmaker wrote:
quoted hunk
This adds the device tree source for the Wind River SBC834x board. It is based on the MPC834x_MDS DTS, with the biggest difference being the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, and this file is also dts-v1 format. Signed-off-by: Paul Gortmaker <redacted> --- arch/powerpc/boot/dts/sbc8349.dts | 247 +++++++++++++++++++++++++++++++++++++ 1 files changed, 247 insertions(+), 0 deletions(-)diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
[snip]
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";Grah! Hasn't someone fixed this so that the driver doesn't need the crap device_type? [snip]
+ spi@7000 {
+ device_type = "spi";
+ compatible = "fsl_spi";And again here. [snip]
+ usb@22000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-mph";And here. [snip
+ /* May need to remove if on a part without crypto engine */
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";I'm almost certain this one was fixed, hasn't it been merged yet? [snip]
+ ipic: pic@700 {By generic names best practice this should be "interrupt-controller@700", although that's probably not your error. -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson