RE: Uboot and ML410

This thread really belongs in the u-boot mailing list, I will respond there:

U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Cheers

John

-----Original Message-----
From: linuxppc-embedded-bounces+jhahn=bcfsemi.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+jhahn=bcfsemi.com@ozlabs.org] On
Behalf Of khollan
Sent: Thursday, December 06, 2007 11:01 AM
To: linuxppc-embedded@ozlabs.org
Subject: RE: Uboot and ML410




John Hahn wrote:

quoted

We are also using 3.81 make (Centos 5 distro) with ELDK 4.1 version
downloaded from www.denx.de and have had no problems using the
u-boot.zip srcs from www.xilinx.com/ml410_p, though we use uboot for
our ml403 based development, we can build u-boot for ml403_config as

well as ml410_config.

quoted

Cheers

John

When I try compiling with my tools I get the message  No rule to make
target `hello_world.srec', needed by `all'
Any way to work around this.  I have compiled everything else I use on
my system with these tools and it works fine.  I did some research on
this problem and it seemed to be a problem with the newer versions of
make, but if thats not the case what is the problem?  I don't really
want to install ELDK to keep things consistent.
Thanks
Kevin
--
View this message in context: http://www.nabble.com/Uboot-and-ML410-
tf4951335.html#a14198812
Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded