Re: Problem compiling sequoia using DENX kernel. Xenomai-patch required?

On Tue, 4 Dec 2007 23:14:38 +0100
Niklaus Giger [off-list ref] wrote:

Am Dienstag, 4. Dezember 2007 schrieb Wolfgang Denk:
<...>

quoted

I'm afraid "normal" here still means arch/ppc  -  hopefully  for  not
long any more. Note: a matching Xenomai patch for arch/ppc will be in
Xenomai 2.4 when it comes out in a few days.

Thanks a lot for your explanation. I took 
ksrc/arch/powerpc/patches/adeos-ipipe-2.6.23-ppc-1.6-00.patch 
from the xenomai trunk and was able to compile and boot successfully
the yosemite board (using ARCH=ppc). Will try the sequoaia board tomorrow.

I hope that this is a good starting point to get my custom PPC440EPx board 
into shape. I think once the arch/powerpc will work for PPC440 it should not 
be a lot of work to port it from ppc -> powerpc.

Sequoia is already in arch/powerpc.  At least most of the base support.

josh