Re: 2.6 kernel hangs after loading device tree

Hello
Did u get a solution to this? I have similar issues. How do u enable
debugging in UBoot?
Thanks

charanya venkatraman wrote:

Hi all
       Sorry about the previous mail.Got sent  by mistake.

Iam using the 2.6.22.5 kernel on MPC 8560 and MPC8540 on my custom
board.Mykernel hangs after loading the device tree in both the
processors .There is
no output on the serial port after loading the device tree.Am using U-boot
1.2.0 as the bootloader.After enabling debug in u-boot i could see that
the
control is getting transferred to the kernel after which it hangs.Earlier
i
tried using 2.6.21 which also hangs at the same point.The config files
used
were MPC8540ADS_defconfig and MPC8560ADS_defconfig under powerpc
directory.
The changes that were made to the device tree are:
1.The reg and ranges properties of the soc node have been changed to
account
for the change in CCSRBAR of my board.
2.Removed the PCI,mdio nodes and ethernet nodes since i dont need support
for these as of now.

I have tried the following console arguments:
MPC8540: bootargs root=/dev/ram rw console=ttyS0,115200
MPC8560:bootargs root=/dev/ram rw console=ttyCPM0,115200

Any help on this issue??

Thanks.
Charanya.

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
View this message in context: http://www.nabble.com/2.6-kernel-hangs-after-loading-device-tree-tf4348921.html#a13848328
Sent from the linuxppc-embedded mailing list archive at Nabble.com.