mpc 860 boot linux2.6.23 problem
From: keng_629 <hidden>
Date: 2007-10-21 13:43:42
the problem has solved ,it is the serial cpm dug,but i don't know where it is. i used the denx linux tree,it works fine,thank you for you help. thank you keng_629 2007-10-19 发件人： Scott Wood 发送时间： 2007-10-18 01:32:05 收件人： Dan Malek 抄送： linuxppc-embedded@ozlabs.org 主题： Re: mpc 860 boot linux2.6.23 problem Dan Malek wrote:
On Oct 17, 2007, at 11:31 AM, Scott Wood wrote:quoted
I just pulled Wolfgang's latest u-boot tree, and I don't see any fdt or ft_ calls in cpu/mpc8xx, nor in any 8xx board that I recognize.The STx XTc 885 is supported and was used for a majority of the FT development in u-boot. I just built it a few months ago, it worked fine, so if it isn't working today the changes should be minimal to bring it up to date.
OK, that wasn't a board I recognized. :-P Still, most 8xx boards are not yet converted AFAICT. Not that it'd be hard to do so, but it might be a bit misleading to say "upgrade u-boot and get device tree support". :-) -Scott _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded