Re: [PATCH 0/2] mpc52xx: stop drivers from accessing clock config directly

On 24/10/07 14:14 -0600, Grant Likely wrote:

On 10/24/07, Domen Puncer [off-list ref] wrote:

quoted

On 24/10/07 12:24 -0600, Grant Likely wrote:

quoted

Domen,

Here's a real solution to the problem.  I've somewhat tested this on
the lite5200b.  Can you give it a spin on efika and see if SPI still
works for you?

My test case was lite5200b too, I don't think I ever tried SPI on
efika.
(Are even the right pins on irda connector, or is a necessary line
missing?)

Hmm, I guess that's right.  Can you at least make sure it still boots
on Efika?  Some of the clock detection stuff has changed so I want to
make sure it still boots.

OK. I'll do that tomorrow.

Are you setup to do your SPI test easily on you lite5200b?  When I say
"somewhat" tested; I mean I probed the driver and it didn't crash.
:-)  I haven't tried to run traffic over it.

Sorry, lite5200b is resting these days. :-(

Can you check that on your system?  If not, can you email me what
setup/programs you used for testing?  I know very little about the SPI
infrastructure.

For userspace part I used something like: Documentation/spi/spidev
And for kernel the attached, to fill get binded to spidev driver.


	Domen

Thanks,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195

-- 
Domen Puncer | Research & Development
.............................................................................................
Telargo d.o.o. | Zagrebška cesta 20 | 2000 Maribor | Slovenia
.............................................................................................
www.telargo.com