[PATCH v5 9/9] add MPC837x MDS board default device tree

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE6891d

7 messages, 3 authors, 2007-10-19 · open the first message on its own page

[PATCH v5 9/9] add MPC837x MDS board default device tree

From: Li Yang <hidden>
Date: 2007-10-18 10:06:02

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
new file mode 100644
index 0000000..8530de6
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -0,0 +1,282 @@
+/*
+ * MPC8377E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "fsl,mpc8377emds";
+	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,837x@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 20000000>;	// 512MB at 0
+	};
+
+	soc837x@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		spi@7000 {
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = < &ipic >;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = < &ipic >;
+				interrupts = <11 8>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy2 >;
+		};
+
+		ethernet@25000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy3 >;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		crypto@30000 {
+			model = "SEC3";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = < &ipic >;
+			/* Rev. 3.0 geometry */
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <000001fe>;
+			descriptor-types-mask = <03ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <2e000 1000>;
+			interrupts = <2a 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		sata@18000 {
+			model = "SATA-300";
+			compatible = "fsl,mpc8379-sata";
+			reg = <18000 1000>;
+			interrupts = <2c 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &serdes1 >;
+		};
+
+		sata@19000 {
+			model = "SATA-300";
+			compatible = "fsl,mpc8379-sata";
+			reg = <19000 1000>;
+			interrupts = <2d 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &serdes1 >;
+		};
+
+		serdes1:serdes@e3000 {
+			compatible = "fsl,serdes";
+			reg = <e3000 100>;
+			vdd-1v;
+			protocol = "sata";
+			clock = <d#100>;
+		};
+
+		serdes2:serdes@e3100 {
+			compatible = "fsl,serdes";
+			reg = <e3100 100>;
+			vdd-1v;
+			protocol = "pcie";
+			clock = <d#100>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+		};
+	};
+
+	pci@e0008500 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 90000000 90000000 0 10000000
+		          42000000 0 80000000 80000000 0 10000000
+		          01000000 0 00000000 e2000000 0 00100000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008500 100>;
+		compatible = "fsl,mpc83xx-pci", "83xx";
+		device_type = "pci";
+	};
+};

diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
new file mode 100644
index 0000000..009300b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts

@@ -0,0 +1,264 @@
+/*
+ * MPC8378E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "fsl,mpc8378emds";
+	compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,837x@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 20000000>;	// 512MB at 0
+	};
+
+	soc837x@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		spi@7000 {
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = < &ipic >;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = < &ipic >;
+				interrupts = <11 8>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy2 >;
+		};
+
+		ethernet@25000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy3 >;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		crypto@30000 {
+			model = "SEC3";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = < &ipic >;
+			/* Rev. 3.0 geometry */
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <000001fe>;
+			descriptor-types-mask = <03ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <2e000 1000>;
+			interrupts = <2a 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		serdes1:serdes@e3000 {
+			compatible = "fsl,serdes";
+			reg = <e3000 100>;
+			vdd-1v;
+			protocol = "sgmii";
+			clock = <d#100>;
+		};
+
+		serdes2:serdes@e3100 {
+			compatible = "fsl,serdes";
+			reg = <e3100 100>;
+			vdd-1v;
+			protocol = "pcie";
+			clock = <d#100>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+		};
+	};
+
+	pci@e0008500 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 90000000 90000000 0 10000000
+		          42000000 0 80000000 80000000 0 10000000
+		          01000000 0 00000000 e2000000 0 00100000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008500 100>;
+		compatible = "fsl,mpc83xx-pci", "83xx";
+		device_type = "pci";
+	};
+};

diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
new file mode 100644
index 0000000..0f6e9d4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts

@@ -0,0 +1,300 @@
+/*
+ * MPC8379E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "fsl,mpc8379emds";
+	compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,837x@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 20000000>;	// 512MB at 0
+	};
+
+	soc837x@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		spi@7000 {
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = < &ipic >;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = < &ipic >;
+				interrupts = <11 8>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy2 >;
+		};
+
+		ethernet@25000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy3 >;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		crypto@30000 {
+			model = "SEC3";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = < &ipic >;
+			/* Rev. 3.0 geometry */
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <000001fe>;
+			descriptor-types-mask = <03ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <2e000 1000>;
+			interrupts = <2a 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		sata@18000 {
+			model = "SATA-300";
+			compatible = "fsl,mpc8379-sata";
+			reg = <18000 1000>;
+			interrupts = <2c 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &serdes1 >;
+		};
+
+		sata@19000 {
+			model = "SATA-300";
+			compatible = "fsl,mpc8379-sata";
+			reg = <19000 1000>;
+			interrupts = <2d 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &serdes1 >;
+		};
+
+		sata@1a000 {
+			model = "SATA-300";
+			compatible = "fsl,mpc8379-sata";
+			reg = <1a000 1000>;
+			interrupts = <2e 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &serdes2 >;
+		};
+
+		sata@1b000 {
+			model = "SATA-300";
+			compatible = "fsl,mpc8379-sata";
+			reg = <1b000 1000>;
+			interrupts = <2f 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &serdes2 >;
+		};
+
+		serdes1:serdes@e3000 {
+			compatible = "fsl,serdes";
+			reg = <e3000 100>;
+			vdd-1v;
+			protocol = "sata";
+			clock = <d#100>;
+		};
+
+		serdes2:serdes@e3100 {
+			compatible = "fsl,serdes";
+			reg = <e3100 100>;
+			vdd-1v;
+			protocol = "sata";
+			clock = <d#100>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+		};
+	};
+
+	pci@e0008500 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 90000000 90000000 0 10000000
+		          42000000 0 80000000 80000000 0 10000000
+		          01000000 0 00000000 e2000000 0 00100000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008500 100>;
+		compatible = "fsl,mpc83xx-pci", "83xx";
+		device_type = "pci";
+	};
+};

-- 
1.5.3.2.104.g41ef

Re: [PATCH v5 9/9] add MPC837x MDS board default device tree

From: Kumar Gala <hidden>
Date: 2007-10-18 13:20:44

is it me or are you just posting the patches you're updating?  (this  
is the only v5 patch I saw in the series)

On Oct 18, 2007, at 5:16 AM, Li Yang wrote:

quoted hunk

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/

boot/dts/mpc8377_mds.dts
new file mode 100644
index 0000000..8530de6

--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -0,0 +1,282 @@
+/*
+ * MPC8377E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or

modify it
+ * under  the terms of  the GNU General  Public License as  
published by the
+ * Free Software Foundation;  either version 2 of the  License, or  
(at your
+ * option) any later version.
+ */
+
+/ {
+	model = "fsl,mpc8377emds";
+	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,837x@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 20000000>;	// 512MB at 0
+	};
+
+	soc837x@e0000000 {

soc@e0000000

+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {

                         #address-cells = <1>;
                         #size-cells = <0>;

+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		i2c@3100 {

                         #address-cells = <1>;
                         #size-cells = <0>;

+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		spi@7000 {
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = < &ipic >;

mode = "cpu";

+			mode = <0>;
+		};
+

- k

RE: [PATCH v5 9/9] add MPC837x MDS board default device tree

From: Li Yang-r58472 <hidden>
Date: 2007-10-18 13:33:28

-----Original Message-----
From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
Sent: Thursday, October 18, 2007 9:17 PM
To: Li Yang-r58472
Cc: paulus@samba.org; linuxppc-dev@ozlabs.org
Subject: Re: [PATCH v5 9/9] add MPC837x MDS board default device tree
=20
is it me or are you just posting the patches you're updating?=20
 (this is the only v5 patch I saw in the series)

I'm only posting the patch updated, to prevent spamming the list.  If
you want, I can send the whole series to you.

=20
On Oct 18, 2007, at 5:16 AM, Li Yang wrote:
=20

quoted

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/=20

boot/dts/mpc8377_mds.dts new file mode 100644 index 0000000..8530de6

quoted

+	memory {
+		device_type =3D "memory";
+		reg =3D <00000000 20000000>;	// 512MB at 0
+	};
+
+	soc837x@e0000000 {

=20
soc@e0000000

I can update this now, but the device tree won't be usable by current
u-boot.

quoted

+		spi@7000 {
+			compatible =3D "mpc83xx_spi";
+			reg =3D <7000 1000>;
+			interrupts =3D <10 8>;
+			interrupt-parent =3D < &ipic >;

=20
mode =3D "cpu";

Oh ya,  the spec has been changed.  I also need to update mpc83xx_spi to
fsl_spi.

- Leo

Re: [PATCH v5 9/9] add MPC837x MDS board default device tree

From: Kumar Gala <hidden>
Date: 2007-10-18 14:04:15

On Oct 18, 2007, at 8:33 AM, Li Yang-r58472 wrote:

quoted

-----Original Message-----
From: Kumar Gala [mailto:galak@kernel.crashing.org]
Sent: Thursday, October 18, 2007 9:17 PM
To: Li Yang-r58472
Cc: paulus@samba.org; linuxppc-dev@ozlabs.org
Subject: Re: [PATCH v5 9/9] add MPC837x MDS board default device tree

is it me or are you just posting the patches you're updating?
 (this is the only v5 patch I saw in the series)

I'm only posting the patch updated, to prevent spamming the list.  If
you want, I can send the whole series to you.

I think posting the full patchset for v6 would be good since we've  
gotten that far.

quoted

On Oct 18, 2007, at 5:16 AM, Li Yang wrote:

quoted

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/

boot/dts/mpc8377_mds.dts new file mode 100644 index 0000000..8530de6

quoted

+	memory {
+		device_type = "memory";
+		reg = <00000000 20000000>;	// 512MB at 0
+	};
+
+	soc837x@e0000000 {

soc@e0000000

I can update this now, but the device tree won't be usable by current
u-boot.

Its my understanding Kim's going to deal with this in the public u- 
boot tree.

quoted

+		spi@7000 {
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = < &ipic >;

mode = "cpu";

Oh ya,  the spec has been changed.  I also need to update  
mpc83xx_spi to
fsl_spi.

- Leo

Re: [PATCH v5 9/9] add MPC837x MDS board default device tree

From: David Gibson <hidden>
Date: 2007-10-19 00:56:13

On Thu, Oct 18, 2007 at 06:16:20PM +0800, Li Yang wrote:

quoted hunk

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
new file mode 100644
index 0000000..8530de6
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -0,0 +1,282 @@

[snip]

+		crypto@30000 {
+			model = "SEC3";
+			compatible = "talitos";

That compatible doesn't look specific enough.  It should at least have
a vendor portion.  In general it's best to have all the information
you need to pick a driver and options in compatible, rather than
splitting that info into model.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

RE: [PATCH v5 9/9] add MPC837x MDS board default device tree

From: Li Yang-r58472 <hidden>
Date: 2007-10-19 07:31:41

-----Original Message-----
From: David Gibson [mailto:david@gibson.dropbear.id.au]=20
Sent: Friday, October 19, 2007 8:56 AM
To: Li Yang-r58472
Cc: galak@kernel.crashing.org; paulus@samba.org;=20
linuxppc-dev@ozlabs.org
Subject: Re: [PATCH v5 9/9] add MPC837x MDS board default device tree
=20
On Thu, Oct 18, 2007 at 06:16:20PM +0800, Li Yang wrote:

quoted

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts=20

b/arch/powerpc/boot/dts/mpc8377_mds.dts
new file mode 100644
index 0000000..8530de6

--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -0,0 +1,282 @@

[snip]

quoted

+		crypto@30000 {
+			model =3D "SEC3";
+			compatible =3D "talitos";

=20
That compatible doesn't look specific enough.  It should at=20
least have a vendor portion.  In general it's best to have=20
all the information you need to pick a driver and options in=20
compatible, rather than splitting that info into model.

I think we could do this in a separate patch.  Change the spec and then
update all the in-tree device tree with SEC node.

- Leo

Re: [PATCH v5 9/9] add MPC837x MDS board default device tree

From: Kumar Gala <hidden>
Date: 2007-10-19 13:10:50

On Oct 19, 2007, at 2:31 AM, Li Yang-r58472 wrote:

quoted

-----Original Message-----
From: David Gibson [mailto:david@gibson.dropbear.id.au]
Sent: Friday, October 19, 2007 8:56 AM
To: Li Yang-r58472
Cc: galak@kernel.crashing.org; paulus@samba.org;
linuxppc-dev@ozlabs.org
Subject: Re: [PATCH v5 9/9] add MPC837x MDS board default device tree

On Thu, Oct 18, 2007 at 06:16:20PM +0800, Li Yang wrote:

quoted

Signed-off-by: Li Yang <redacted>
---

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts

b/arch/powerpc/boot/dts/mpc8377_mds.dts
new file mode 100644
index 0000000..8530de6

--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -0,0 +1,282 @@

[snip]

quoted

+		crypto@30000 {
+			model = "SEC3";
+			compatible = "talitos";

That compatible doesn't look specific enough.  It should at
least have a vendor portion.  In general it's best to have
all the information you need to pick a driver and options in
compatible, rather than splitting that info into model.

I think we could do this in a separate patch.  Change the spec and  
then
update all the in-tree device tree with SEC node.

agreed.

- k

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help