Re: [PATCH] drivers/ata: add support to Freescale 3.0Gbps SATA Controller

On Wed, 10 Oct 2007, Li Yang wrote:

From: Ashish Kalra <redacted>

This patch adds support for Freescale 3.0Gbps SATA Controller supporting
Native Command Queueing(NCQ), device hotplug, and ATAPI.  This controller
can be found on MPC8315 and MPC8378.

Signed-off-by: Ashish Kalra <redacted>
Signed-off-by: Li Yang <redacted>
---
 drivers/ata/Kconfig    |    9 +
 drivers/ata/Makefile   |    1 +
 drivers/ata/sata_fsl.c | 1505 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/ata/sata_fsl.h |  104 ++++
 4 files changed, 1619 insertions(+), 0 deletions(-)
 create mode 100644 drivers/ata/sata_fsl.c
 create mode 100644 drivers/ata/sata_fsl.h

This patch shouldn't be accepted until we close on the device tree
definition since it impacts the driver.

Also CONFIG_SATA_FSL_FPGA_PCI should be removed since that was just an
internal debug thing.

- k