Re: Interrupt-problem mpc5200

Hello,

Is it possible that this call failed?
intr = ioremap(MPC52xx_MBAR+MPC52xx_INTR_OFFSET, MPC52xx_INTR_SIZE); 

Maybe intr is invalid at this point?
out_be32(&intr->ctrl, intr_ctrl);       // ERROR!


Regards,
WITTROCK


S. Fricke wrote:

Hello all.

What are the steps to configure an MPC500B-Board to react on an IRQ (2)?

I have written a test-driver with this code-snippets, but the prozessor
hangs when loading the driver.

my __init-function looks like:

static int __init mod_init( void ) 
{
    volatile static struct mpc52xx_intr __iomem *intr;
    u32 intr_ctrl;

    // ...

    printk( "intmod.ko: interrupt init ");
    if (request_irq(MPC52xx_IRQ2, intmod_isr, IRQF_SHARED , "intmod",
                INTMOD_IRQ_BOARD) == -EBUSY)
        printk("KO\n");
    else
        printk("OK\n");

    intr = ioremap(MPC52xx_MBAR+MPC52xx_INTR_OFFSET, MPC52xx_INTR_SIZE);

    // read - modify - write
    intr_ctrl = in_be32(&intr->ctrl);
    intr_ctrl &= 0xfff3ffff;
    intr_ctrl |= 0x00080200;
    out_be32(&intr->ctrl, intr_ctrl);       // ERROR!

    if(intr) iounmap(intr);

    // ...
}

On the Line, marked with "ERROR!" the prozessor hangs and the kernel drops
out.

TIA: Silvio


Mit freundlichen Gruessen
Silvio Fricke

-- 
-- S. Fricke ----------------------------- MAILTO:silvio.fricke@gmail.com
--
   Diplom-Informatiker (FH)
   Linux-Entwicklung                       JABBER:      fricke@jabber.org
----------------------------------------------------------------------------


 
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
View this message in context: http://www.nabble.com/Interrupt-problem-mpc5200-tf4413834.html#a12613692
Sent from the linuxppc-embedded mailing list archive at Nabble.com.