Re: Which 2.6 kernel for MPC5200

On 9/10/07, Grant Likely [off-list ref] wrote:

On 9/10/07, Babarovic Ivica [off-list ref] wrote:

quoted

Hi!

What kernel should I get/pull for MPC5200 clone board.
I've been away from coding on mpc5200 for quite some time now.
I've read some archives from ML.
Git repo on Sylvain Munauts url:
http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx.gitpage
isn't working. Nothing on http://*git*.secretlab.ca/cgi-bin/*gitweb*.cgi
<http://git.secretlab.ca/cgi-bin/gitweb.cgi> to.

I've pulled the sources from kernel.org git server.
git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
linux-2.6-mpc52xx

My 52xx git tree became way out of date, so I dropped it from the
server.  Best bet is to use mainline which gives your everything
except the drivers that use the bestcomm DMA engine (like Ethernet).

Then you need to apply the bestcomm patches.  You can get them here:

http://www.246tnt.com/mpc52xx/dev_full/

I just finished rebasing the Efika version of those patches to current mainline.

I'm working on merging support for my Phytec pcm030 into them.
After I get stable the plan is to switch over to Domon's new FEC driver.

Have fun,
g.

--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
Jon Smirl
jonsmirl@gmail.com