Re: [PATCH 10/10] mpc82xx: Add pq2fads board support.
From: Kumar Gala <hidden>
Date: 2007-09-13 06:37:11
quoted hunk ↗ jump to hunk
diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts new file mode 100644 index 0000000..ad736f8--- /dev/null +++ b/arch/powerpc/boot/dts/pq2fads.dts@@ -0,0 +1,236 @@ +/* + * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/ormodify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "pq2fads"; + compatible = "fsl,pq2fads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#32>; + i-cache-line-size = <d#32>; + d-cache-size = <d#16384>; + i-cache-size = <d#16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + CS: chipselect {
We need to document this in booting-without-of.
+ compatible = "fsl,pq2fads-chipselect",
+ "fsl,mpc8280-chipselect",
+ "fsl,pq2-chipselect";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ fsl,ctrl = <&CSCTRL>;
+
+ ranges = <0 0 fe000000 00800000
+ 1 0 f4500000 00008000
+ 8 0 f8200000 00008000>;
+
+ flash@0,0 {
+ device_type = "rom";
+ compatible = "direct-mapped";
+ reg = <0 0 800000>;
+ probe-type = "JEDEC";
+ bank-width = <4>;
+ };
+
+ bcsr@1,0 {
+ reg = <1 0 20>;
+ compatible = "fsl,pq2fads-bcsr";
+ };
+
+ PCI_PIC: pic@8,0 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <8 0 8>;
+ compatible = "fsl,pq2ads-pci-pic";
+ interrupt-parent = <&PIC>;
+ interrupts = <18 8>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ soc@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8280", "fsl,pq2-soc";
+ ranges = <00000000 f0000000 00053000
+ 80000000 80000000 40000000
+ f6000000 f6000000 02000000>;
+
+ CSCTRL: chipselect {
+ compatible = "fsl,mpc8280-chipselect-ctrl",
+ "fsl,pq2-chipselect-ctrl";
+ reg = <10100 60>;
+ fsl,bus = <&CS>;
+ };
+
+ cpm@119c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
+ reg = <119c0 30 0 2000>;
+ ranges;
+
+ brg@119f0 {
+ compatible = "fsl,mpc8280-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <119f0 10 115f0 10>;
+ };
+
+ serial@11a00 {
+ device_type = "serial";
+ compatible = "fsl,mpc8280-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <11a00 20 8000 100>;
+ interrupts = <28 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <00800000>;
+ };
+
+ serial@11a20 {
+ device_type = "serial";
+ compatible = "fsl,mpc8280-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <11a20 20 8100 100>;
+ interrupts = <29 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <04a00000>;
+ };
+
+ ethernet@11320 {
+ device_type = "network";
+ compatible = "fsl,mpc8280-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <11320 20 8500 100 113b0 1>;
+ interrupts = <21 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&PHY0>;
+ linux,network-index = <0>;
+ fsl,cpm-command = <16200300>;
+ };
+
+ ethernet@11340 {
+ device_type = "network";
+ compatible = "fsl,mpc8280-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <11340 20 8600 100 113d0 1>;
+ interrupts = <22 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&PHY1>;
+ linux,network-index = <1>;
+ fsl,cpm-command = <1a400300>;
+ local-mac-address = [00 e0 0c 00 79 01];
+ };
+
+ mdio@10d40 {
+ device_type = "mdio";
+ compatible = "fsl,pq2fads-mdio-bitbang",
+ "fsl,mpc8280-mdio-bitbang",
+ "fsl,cpm2-mdio-bitbang";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <10d40 14>;
+ fsl,mdio-pin = <9>;
+ fsl,mdc-pin = <a>;
+
+ PHY0: ethernet-phy@0 {
+ interrupt-parent = <&PIC>;
+ interrupts = <19 2>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&PIC>;
+ interrupts = <19 2>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ usb@11b60 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8280-usb",
+ "fsl,cpm2-usb";
+ reg = <11b60 18 8b00 100>;
+ interrupt-parent = <&PIC>;
+ interrupts = <b 8>;
+ fsl,cpm-command = <2e600000>;
+ };
+ };
+
+ PIC: interrupt-controller@10c00 {
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <10c00 80>;
+ compatible = "fsl,mpc8280-pic", "fsl,pq2-pic";this should also have a "fsl,cpm2-pic" or something of that form. (exact same pic exists on 8560, 85xx+CPM)
+ };
+
+ pci@10800 {
+ device_type = "pci";
+ reg = <10800 10c 101ac 8 101c4 8>;
+ compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ clock-frequency = <d#66000000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x16 */
+ b000 0 0 1 &PCI_PIC 0
+ b000 0 0 2 &PCI_PIC 1
+ b000 0 0 3 &PCI_PIC 2
+ b000 0 0 4 &PCI_PIC 3
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 &PCI_PIC 4
+ b800 0 0 2 &PCI_PIC 5
+ b800 0 0 3 &PCI_PIC 6
+ b800 0 0 4 &PCI_PIC 7
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 &PCI_PIC 8
+ c000 0 0 2 &PCI_PIC 9
+ c000 0 0 3 &PCI_PIC a
+ c000 0 0 4 &PCI_PIC b>;
+
+ interrupt-parent = <&PIC>;
+ interrupts = <12 8>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 f6000000 0 02000000>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/soc/cpm/serial@11a00";
+ };
+};- k