On Wed, 2007-08-29 at 18:29 -0600, Grant Likely wrote:

On 8/29/07, Robert Woodworth [off-list ref] wrote:

quoted

I'm trying to port Linux to a new Virtex Platform.  The kernel will not
uncompress, I get the following on the console:

loaded at:     00400000 004FB19C
board data at: 004F9120 004F919C
relocated to:  00404054 004040D0
zimage at:     00404E50 004F8409
avail ram:     004FC000 04000000

Linux/PPC load: console=ttyUL root=/dev/xsa2
Uncompressing Linux...
zlib_inflateInit2 returned 00506530
exit

Any ideas what causes this error??
Is something mis-configured on my EDK project?

Possibly, do you know that EDK has your ram is configured correctly
(ie. have you run a memory test application)?

quoted

I have 64MB DDR on the OPB *not* the PLB.
Is that a problem??

It shouldn't be the problem, but why are you doing that?

I did notice in my configuration, that when the memory is on the PLB it
has an interrupt flag and when it's on the OPB it doesn't.  What is the
interrupt for?  DMA's?

Could Linux be doing a DMA in the uncompression where the lack of an
interrupt causes and error?