Hi Grant,

	Thank you for your response.

My u-boot bootargs is set to:
console=ttyUL0,9600 root=/dev/nfs rw nfsroot=129.117.144.113:/opt/eldk41/ppc_4xx,tcp  ip=::::virtex4-mirek:eth0:dhcp panic=1

where I can find __log_buf for kernel messages?



Best Regards

Mirek



On Mon, 27 Aug 2007, Grant Likely wrote:

On 8/27/07, Mirek23 [off-list ref] wrote:

quoted

4. I am trying to start the kernel

=> bootm 0x1000000

## Booting image at 01000000 ...
Image Name:   Linux-2.6.21-rc6
Image Type:   PowerPC Linux Kernel Image (gzip compressed)
Data Size:    991375 Bytes = 968.1 kB
Load Address: 00000000
Entry Point:  00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Have you looked in __log_buf for kernel messages?
What does your u-boot env look like?
Do you have 'console=ttyUL0' or 'console=ttyS0' in the kernel command line?

Cheers,
g.

-- 
=============================================================================
          Miroslaw Dach (Miroslaw.Dach@psi.ch) - SLS/Controls Group 
                PSI - Paul Scherrer Institut CH-5232 Villigen
=============================================================================