RE: no output to serial console from /init process on ml405

Just a guess, but do you have stdout and friends defined as recommended
in the Compulsory links section of Documentation/devices.txt?
	-Michael

-----Original Message-----
From:=20
linuxppc-embedded-bounces+mbenedict=3Dtwacs.com@ozlabs.org=20
[mailto:linuxppc-embedded-bounces+mbenedict=3Dtwacs.com@ozlabs.o

rg] On Behalf Of Anton Kowalski

Sent: Wednesday, August 08, 2007 6:28 AM
To: linuxppc-embedded@ozlabs.org
Subject: no output to serial console from /init process on ml405
=20
Hi All:
=20
I'm trying to bring up linux 2.6.21.1 on an ml405 board. The kernel
boots fine but the init process does not produce any output. The /init
program resides in an initramfs file system and I believe the /dev
device files have been set up correctly. Here's an excerpt from my
initramfs specification:
=20
    dir /dev 755 0 0
    nod /dev/console 644 0 0 c 5 1
    nod /dev/ttyS0 644 0 0 c 4 64
=20
(I am able to open these files from the init program. I tested this by
sleeping for a specified time on success.)
=20
Also, printk continues to function after /init terminates and before
the kernel panics.
=20
Here are the last few lines of the console output:
=20
[    0.507478] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing disabled
[    0.513862] serial8250.0: ttyS0 at MMIO 0x80201003 (irq =3D=20
3) is a 16550A
[    2.927509] RAMDISK driver initialized: 1 RAM disks of 8192K size
1024 blocksize
[    3.018391] tun: Universal TUN/TAP device driver, 1.6
[    3.079115] tun: (C) 1999-2004 Max Krasnyansky [off-list ref]
[    3.154919] mice: PS/2 mouse device common for all mice
[    3.218021] TCP cubic registered
[    3.257034] NET: Registered protocol family 1
[    3.309405] NET: Registered protocol family 17
[    3.363462] Freeing unused kernel memory: 300k init
[   23.488277] Kernel panic - not syncing: Attempted to kill init!
[   23.559517] Rebooting in 180 seconds..<NULL>
=20
I'm using the plb uart and the 8250.c driver. (The obp uartlite driver
didn't work so I switched.) The kernel and the init program were
compiled with eldk.
=20
Any insights into resolving this problem are greatly appreciated.
=20
=20
Anton
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
=20