Re: Powerbook hard shutdown after boot if it's hot

On Thu, 2007-06-14 at 17:39 +0200, Michael Buesch wrote:

Hi,

I have a strange problem that my Powerbook shuts down hard
right after boot, if the machine is hot.
For example, if I compile a kernel and then want to reboot
into it, it will shutdown the machine right after userspace
is booted. Cooling down the machine will fix the issue.
I first thought this might be a problem with the adt746x
chip driver (thermostat). But this turns out to not be
the case. I disabled the module (put return 0; early into
the module_init function), but the problem still exists.
I'm not sure how to debug this, as I don't see what's
going on. I tried to boot with init=/bin/bash. It will
boot into the shell but shutdown hard after 1 or 2 seconds.
It seems like there is some timer hitting in right after
userspace is up and running (some workqueue?). Strange is
that it _only_ shuts down the machine when it's hot
and it _only_ does this right after boot. If it survived
the first few seconds after boot, it's rock-stable and
it won't show any problems when getting hot (will drive
the fans correctly, etc etc...)

Any idea how to debug this?

Not really, that's weird.. maybe trying to print the values in the adt
sensor to see how hot it is vs. the various thresholds set by the
firmware ? Maybe the PMU is trying to send us a "high temp" alert via a
PMU message we don't know how to parse and expcts us to reply in a given
amount of time (for example by slowing the CPU down).

Ben.