Re: [PATCH 2.6.21-rt2] PowerPC: decrementer clockevent driver

Kumar Gala wrote:

On May 18, 2007, at 9:48 AM, Thomas Gleixner wrote:

quoted

On Fri, 2007-05-18 at 15:28 +0100, Matt Sealey wrote:

quoted

I think both the MPC52xx GPT0-7 and the SLT0-1 fulfil this fairly
easily.

There is some basic work for MPC5200 available:

http://www.pengutronix.de/oselas/bsp/phytec/index_en.html#phyCORE-MPC5200B-tiny

I asked this earlier, but figured you might have a better insight.  Is
their value in having 'drivers' for more than one clock source?  I'd say
most (of not all) the PPC SoCs have timers on the system side that we
could provide drivers for, I'm just not sure if that does anything for
anyone.

As I asked after, I'm also very intrigued as to what is going to end
up using these timers, but likewise, not much use writing a driver if
everyone can use the extremely high resolution decrementer all at
once..

As I said before too, at least Intel has decided there is a great need
for up to 256 high resolution timer sources on a system, but since this
is a fairly new concept to Linux (and hrtimers and dynticks too) it
only seems to be used in the case of i8254/RTC emulation, mostly on
x86-64.

I'm looking at it now and finding "users" of hrtimers is looking very
thin on the ground. Maybe it's justified on the basis that more is
better, and having support is preferable to not having it (even if
nobody really uses it) but it seems the entire gamut of timing
possibility in Linux can be handled through a simple, and single,
high resolution timer and a queue of events..

So do we need some more? :D

-- 
Matt Sealey [off-list ref]
Genesi, Manager, Developer Relations