Ken,

On Friday 23 March 2007 19:45, Ken Sakurai wrote:

quoted

I don't know the AVNET 440GX eval board. Is it _identical_ to the
IBM/AMCC Ocotea? If not you will most likely have no luck with this
image. You will have to port Linux to this special board.

yeah, sounds like. I was so optimistic that Linux is kind of primary OS for
any ppc board  when I choosed this board :-)

I was just using the elf image, instead of uimage.
'6501A8C0.img' is refereing zImage.img which is Linux elf image.
It looks to me that the bootelf command interprets ELF format corrently.

As you sugested, I also made uImage and used bootm to boot it.
But no luck. Here is the log.

Of course you had no luck, since the Ocotea uImage can't work on a different 
hardware like the AVNET board. Again, you have to port Linux to this platform 
first. And you need to know detailed information for this procedure 
(schematics...).

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================