On 01/03/07 15:51 +0100, Bartlomiej Sieka wrote:

Grant Likely wrote:

quoted

On 3/1/07, Domen Puncer [off-list ref] wrote:

quoted

Hi!

Patches are based on latest mainline git tree + fec patches:
Fec_MPC5200_eth_driver.patch
Copy_bestcomm_support_files_into_arch_powerpc.patch
Make_FEC_work_on_the_lite5200.patch

---8<---snip--->8---

quoted

I would appreaciate any comments, suggestions etc.

Cool, good work.  I'll try to do a proper review today.

Note on the Bestcomm stuff; the patches that you've referenced above
will not be going into mainline.  They will be replaced by a new set
of bestcomm/FEC patches, hopfully in the .22 timeframe, so your
patches there will need some rework.

Hello,

I am working on porting arch/powerpc Linux to a custom MPC5200B-based 
board, and currently using your 52xx-dev branch. Is this new set of 
bestcomm/FEC patches already in any of your publicly available branches, 
or is it something completely fresh? I am seeing some networking 
problems, and would be interested in giving new patches a try.

Patches I used were from Grant's 52xx-dev branch.


	Domen

Regards,
Bartlomiej



_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded