Re: problems with pci bus on a pm520 board

Hi,

Segher Boessenkool wrote:

You removed the original copyright notice, please don't;
it might even be illegal to do so, depending on where
you live/work.  Just add your own, don't remove the original.

OK, thanx for the hint.

quoted

            interrupt-map = <8000 0 0 1 500 1 1 3 // e100, 10.0
                             8000 0 0 2 500 1 1 3
                             8000 0 0 3 500 1 1 3
                             8000 0 0 4 500 1 1 3

8000 is device 16, not 10

quoted

                             8800 0 0 1 500 1 0 3 // usb 11.0, 11.1, 11.2
                             8800 0 0 2 500 1 2 3
                             8800 0 0 3 500 1 3 3
                             8800 0 0 4 500 0 0 3>;

and 8800 is device 17

Hmm, this is strange. I put some debug printks in the of parser
prom_parser.c in the function of_irq_map_raw somewhere in the machting
loop, which prints the imap and address being parsed. So that the lines
at about 834 now looks like this:
match = 1;
for (i = 0; i < addrsize && match; ++i) {
<snip>
	printk(" -> imap %x addr %x mask %x\n", imap[i], addr[i], mask);
}
for (; i < (addrsize + intsize) && match; ++i) {
<snip>
	printk(" -> imap %x intspec %x mask %x\n", imap[i],
intspec[i-addrsize], mask);
}
<snip>
printk(" -> match=%d (imaplen=%d), addr %d \n", match, imaplen, addr[i]);

With these printks I got for example for device 10.0 the output

Try to map irq for 0000:00:10.0...
        PCI: pdev bus number: 0, devfn: 128
of_irq_map_raw: par=/soc5200@f0000000/pci@0d00,intspec=[0x00000001
0x00008000...],ointsize=1
of_irq_map_raw: ipar=/soc5200@f0000000/pci@0d00, size=1
 -> imap 8000 addr 8000 mask f800
 -> imap 0 addr 0 mask 0
 -> imap 0 addr 0 mask 0
 -> imap 1 intspec 1 mask 7
 -> match=1 (imaplen=60), addr 1
 -> newintsize=3, newaddrsize=0
 -> imaplen=56
 -> new parent: /soc5200@f0000000/pic@500
 -> got it !
 -> got one, spec 3 cells (0x00000001...) on /soc5200@f0000000/pic@500
 -> virq :65

As I have noticed, the array addr is filled in of_irq_map_pci() by
laddr[0] = (pdev->bus->number << 16) | (pdev->devfn << 8);
Since my pdev->bus->number is 0. I got the address 8000 here. Is the
pdev->bus->number actually supposed to be 10 for device 10? I had some
trouble tracking down how the bus number is initialized. It might be
nice if you or some one could give me a hint on this.


Thanx again
cheers
Luotao Fu