On 1/29/07, Joe [off-list ref] wrote:

Linux 2.6.19 shows arc/ppc/configs/ml[403|300]_defconfig,
but I see *zero* indication that the 410 is supported.  Has anyone seen the
ML410 fully functional with Linux + a patch to enable the Ethernet ports?
(I also note that on the mvi$ta site they list support for:  ML300 and ML40x
-- but NOT the ML410.)  My searches also seem to indicate that the IP
included for the 410 Ethernet MAC's is distinctly different from the 403...

Correct, no patches to support 410 have been submitted to either the
u-boot or linuxppc mailing lists as far as I know.  You'll need to get
the patches directly from Xilinx.  I do know that they exist, but I
have not worked with them at all as I don't have access to an ML410.

OTOH, if someone could confirm that this platform is NOT currently supported
that would be just as useful -- decisions can be made and actions taken.

There are a number of Xilinx folks who hang out on this list,
hopefully one of them will see your question and reply.

Cheers,
g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195