Re: flash problem in a LITE5200B

In message [ref] you wrote:

I work with a Freescale LITE5200B, but I have a problem, when I download a
rootfs image to a flash memory in the board, hi have one error:

You don't provide much information (like which software you use to do
the copying - U-Boot, Linux, ... ?), but let me guess...

=> Copy To Flash ............. Outside available Flash

The size of the image is of 3285336 bytes, but the flash memory capacity is
32 MBytes, and I load the image in the first sector on the flash memory.

Let me guess: you do this in U-Boot, and forget

* that U-Boot commands take are usually interpreted in hex, i. e.  if
  you  enter  a byte count of '3285336' than this is 52974390 decimal
  or 50+ MB which definitely *is* outside the available flash

and/or

* that the U-Boot "cp" command operates on 32 bit words (= 4  bytes),
  so when you want to specify a byte count you have to use the "cp.b"
  variant of this command

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"Just think, with VLSI we can have 100 ENIACS on a chip!"
- Alan Perlis