RE: Power management for ppc 85xx

Hi again,

Glad I managed to make sense. I checked the hardware spec on the board
and it looks like we're using everything, apart from the SEC and maybe
the stand-alone I2C (I think we're just using the one within the CMP).
By the way, I made a mistake and the actual processor on the board is
the cut-down 8541, not the 8555. My apologies for that.

This morning I added some printks and confirmed that there is no code
behind pm_ops, so my question remains: is there some code out there that
I can use? (hope so, otherwise I'm doomed...)

Regards and thanks,

Marta Chamorro


-----Original Message-----
From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
Sent: 06 December 2006 22:53
To: Chamorro, Marta
Cc: linuxppc-dev@ozlabs.org; linuxppc-embedded@ozlabs.org
Subject: Re: Power management for ppc 85xx


On Dec 6, 2006, at 4:27 PM, Chamorro, Marta wrote:

Hi Kumar, thanks for the reply.

I am not sure I fully understand your question, but here's an =20
attempt of
an answer :)

What I want to do is:

First stage - Get the processor on doze mode (core halted, but =20
responds
to interrupts)
Second stage - Once I understand how to do that, using all the right
interfaces and so on, get other devices (mainly image processing =20
ASICS)
to stop clocks.

Does that answer your question? Can you help? Do you know where to =20
find
the code that deals with power management for the ppc 8555?

It does, what periphs are you using on the 8555 itself?

- k