Thread (3 messages) 3 messages, 2 authors, 2006-11-17

Re: [PATCH 16/16] Supporting spidernet on Celleb

flat view

From: Arnd Bergmann <arnd@arndb.de>
Date: 2006-11-16 12:49:33

On Wednesday 15 November 2006 11:02, Ishizaki Kou wrote:
This patch adds auto-negotiation.
Downloading firmware operation moves into spider_net_open().
This patch is not tested on Cell-Blade.
This patch needs to be submitted to netdev@vger.kernel.org instead
of linuxppc-dev. Please also Cc: the maintainer of the driver,
James K Lewis [off-list ref], he at least needs to test
the changes.

The patch looks good overall, I have only a small cosmetic comments:
quoted hunk ↗ jump to hunk
@@ -1837,7 +1994,7 @@
=A0=A0=A0=A0=A0=A0=A0=A0}
=A0
=A0try_host_fw:
-=A0=A0=A0=A0=A0=A0=A0dn =3D pci_device_to_OF_node(card->pdev);
+=A0=A0=A0=A0=A0=A0=A0dn =3D (struct device_node *)card->pdev->sysdata;
=A0=A0=A0=A0=A0=A0=A0=A0if (!dn)
=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0goto out_err;
=A0
quoted hunk ↗ jump to hunk
@@ -2071,7 +2234,7 @@
=20
        netdev->irq =3D card->pdev->irq;
=20
-       dn =3D pci_device_to_OF_node(card->pdev);
+       dn =3D (struct device_node *)card->pdev->sysdata;
        if (!dn)
                return -EIO;
=20
This should not be required. If you PCI bus is set up
correctly, pci_device_to_OF_node() will do the right thing.
What problem are you trying to solve here?
+static void
+spider_net_link_phy(struct spider_net_card *card)
quoted hunk ↗ jump to hunk
@@ -2058,6 +2215,12 @@
=A0=A0=A0=A0=A0=A0=A0=A0card->tx_timer.data =3D (unsigned long) card;
=A0=A0=A0=A0=A0=A0=A0=A0netdev->irq =3D card->pdev->irq;
=A0
+=A0=A0=A0=A0=A0=A0=A0card->aneg_count =3D 0;
+=A0=A0=A0=A0=A0=A0=A0init_timer(&card->aneg_timer);
+=A0=A0=A0=A0=A0=A0=A0card->aneg_timer.function =3D
+=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0(void (*)(unsigned long)) s=
pider_net_link_phy;
+=A0=A0=A0=A0=A0=A0=A0card->aneg_timer.data =3D (unsigned long) card;
+
=A0=A0=A0=A0=A0=A0=A0=A0card->options.rx_csum =3D SPIDER_NET_RX_CSUM_DEFA=
ULT;
=A0
=A0=A0=A0=A0=A0=A0=A0=A0card->num_tx_desc =3D tx_descriptors;
You should not need a cast here. It's better to cast the data value
in the function itself than casting the function pointer. This makes
sure we notice when the prototype of the function pointer changes.

	Arnd <><
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help