RE: MPC8360E USB Host Controller Driver

Message: 1
Date: Fri, 8 Sep 2006 11:27:59 +0800
From: "Li Yang-r58472" <redacted>
Subject: RE: MPC8360E USB Host Controller Driver
To: "Laurent Pinchart" <redacted>,
       [off-list ref]
Cc: n.balaji@gdatech.co.in
Message-ID:
       [ref]
Content-Type: text/plain;       charset="US-ASCII"

quoted

Could you give a direct link ? I've been browsing around the
Freescale website for an hour, downloaded hundreds of
megabytes of archives but haven't been able to find the
MPC8360E USB Linux driver.

Laurent Pinchart

Hi Laurent,

I believe that I recall seeing the USB drivers in the "MPC8360E Device
Drivers - Release 1.1 GPL ", accessible from the main 8360 page.

http://www.freescale.com/files/netcomm/software/device_drivers/MPC8360EGPLDRV.zip

One little gotcha... When you unzip this archive, it's a windows
executable, but it doesn't have the '.exe' extension on the file, so
you'll need to add it by hand.  I had to "contact my local FAE" just
to figure out that one when the darn thing wouldn't run.  Too many
years of using Unix I guess.

quoted

PS: Am I the only one to get lost almost every time when I
look for information on www.freescale.com ?

No, rest assured, you're not.  Try finding any information about the
eval board for the 8360 on freescale.com.


-dan