Re: MontaVista 2.6 Kernel support for Xilinx ML40x
From: Frank D Lombardo <hidden>
Date: 2006-08-24 19:27:26
The ml403 reference design has several evaluation cores: opb_uart16550, opb_iic and opb_ethernet. They seem to time-out after about eight hours. Frank Wade Maxfield wrote:
Good question. How long before lockup? The only core that should be
licensed is the ethernet, and I know it was sysgened on a system with
a license. This is the Xilinx reference design for the ml403 board.
On 8/24/06, *Peter Ryser* <peter.ryser@xilinx.com
<mailto:peter.ryser@xilinx.com>> wrote:
Wade,
are you sure that you did not build your hardware with evaluation
cores of the licenses? If you are using the evaluation licenses
the hardware (FPGA design) will stop working after a certain
amount of time and you will see a lock-up.
- Peter
Wade Maxfield wrote:
I've got the LSP, and have booted it on the ML40X.
In my opinion it is currently unstable, but that is my opinion.
I've not been able to keep it powered up for 24 hours without it
locking up on the RS232 serial terminal. Also, running updatedb
over nfs causes it to abort with a kernel panic, although that
might be an interraction with the nfs server. (Although even if
the nfs server dies (which it did not), I don't expect a kernel
panic).
I have had it run over 6 hours without issue, so I expect
subtle memory leaks, not serious problems.
On 8/24/06, *Claus Gindhart* < claus.gindhart@kontron.com
<mailto:claus.gindhart@kontron.com>> wrote:
Frank,
due to my understanding of the GPL (and i have already
invested some time
in understanding the various flavours of open source
licences), you should
contact Montavista, and ask them for the sources.
This board adaption is derivative work of the GPL Kernel, so
the result of
this work also falls under the GPL, and has to be made freely
available
under the terms of the GPL.
--
Mit freundlichen Gruessen / Best regards
Claus Gindhart
SW R&D
Kontron Modular Computers
phone :++49 (0)8341-803-374
mailto:claus.gindhart@kontron-modular.com
<mailto:claus.gindhart@kontron-modular.com>
http://www.kontron.com
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GU d- s++:>++:+ a+ C++$ !U !P L++>$ E-- W+(-) N- o?
K? w !O !M V !PS PE- Y+ PGP+ t 5? X R* tv- b+ DI+++
D-- G e++> h--- !r x+++
------END GEEK CODE BLOCK------
-----Original Message-----
From:
linuxppc-embedded-bounces+claus.gindhart=kontron.com@ozlabs.org
<mailto:kontron.com@ozlabs.org>
[mailto:
linuxppc-embedded-bounces+claus.gindhart=kontron.com@ozlabs.org
<mailto:linuxppc-embedded-bounces+claus.gindhart=kontron.com@ozlabs.org>]
On Behalf Of Frank D Lombardo
Sent: Donnerstag, 24. August 2006 15:59
To: linuxppc-embedded@ozlabs.org
<mailto:linuxppc-embedded@ozlabs.org>
Subject: MontaVista 2.6 Kernel support for Xilinx ML40x
I noticed that MontaVista now has their Pro 4.0 version (2.6
Kernel)
available for the Xilinx ML40x series of boards. I would
assume that
means driver support for at least most of the hardware on the
boards.
Is this code that should be freely available? How would one
get a copy
of these drivers? I am interested in drivers for the ML403.
Thanks,
Frank
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org <mailto:Linuxppc-embedded@ozlabs.org>
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org <mailto:Linuxppc-embedded@ozlabs.org>
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
<https://ozlabs.org/mailman/listinfo/linuxppc-embedded>
------------------------------------------------------------------------
_______________________________________________ Linuxppc-embedded
mailing list Linuxppc-embedded@ozlabs.org
<mailto:Linuxppc-embedded@ozlabs.org>
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
------------------------------------------------------------------------
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded