Re: PPC beginner questions

On 8/21/06, Wade Maxfield [off-list ref] wrote:

Hi Grant,

  Thanks!

  in*
  out*

  I'm assuming inb() outb(), inw() outw()??  I've been googling and have
come up short with info that makes sense. It is almost all x86 centric.

in_8, in_be16, in_be32, out_8, out_be16, out_be32 for big-endian
device registers
in_8, in_le16, in_le32, out_8, out_le16, out_le32 for little endian
device registers

  We will not be porting these drivers, this is a captive box internal use
only, limited run (200 units or so), 10 to 20 year lifespan once it hits the
field.

  So, the virtual address I get back can be used directly.  Can I cast to
short * and long * and char *?

heh, yes you can; but if your writing new code why not use good
practice from the start?  :)

   I apologize for the basic questions, but I expect this will be a final
question for quite some time.

No worries; ask away!

Cheers,
g.


BTW, when on the mailing list, please use "reply to all" and put your
comments below what you're commenting on.  This keeps the thread on
the mailing list for others to see, and it makes it blatentely obvious
what you're commenting on.  (just general list-etiquette)

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195