Re: some problems on the SystemACE driver.

Dear Ameet,
The attached is the log file to record the error. Please unzip and search 
for "XAssert" to go to the end to see the problem. Also, the .config file 
is attached. Please rename the file from config into .config. The linux 
version is 2.6.17.1. When you compile the kernel, please remember to export 
C_INCLUDE_PATH=....../driver/xilinx_edk. Thanks for your work.

Regards
Ming

From: Ameet Patil <redacted>
To: Ming Liu <redacted>
CC: linuxppc-embedded@ozlabs.org
Subject: Re: some problems on the SystemACE driver.
Date: Fri, 14 Jul 2006 12:12:36 +0100

Hi Ming,
   Can you send me the entire text output (in a file) of the compilation
process with errors?

-Ameet

Ming Liu wrote:

quoted

Dear Ameet,

quoted

1. Which TEMAC patch are you using?

(http://source.mvista.com/~ank/paulus-powerpc/20060309/ppc32_xilinx_edk_temac.patch)

quoted

quoted

There are five patches in the directory 20060309 whose address is 

listed

quoted

above by you. I applied all of them in my system, because without any
there will be problems.

quoted

2. After applying the patch, is the driver getting compiled directly
without having to select it via "make menuconfig"?

No. there is an option named "xilinx 10/100/1000 Mbit TEMAC support" in
the menuconfig. I must select it and then compile the kernel.

quoted

3. I don't see a Makefile in the drivers/net/xilinx_temac/ folder?

I have checked. In my kernel, there is the Makefile. I don't know why
this happened to you.

Let me describe the detailed process I did. First, download the kernel
2.6.17.1 (or 2.6.16-rc5). Then apply the five patches for Temac.(If I
use 2.6.17.1, I need to upgrade some files manually. For 2.6.16, there
is no problem.) And then apply the patch for SystemACE. Also copy and
replace the xparameters_ml403.h by my own file generated by EDK. Then
make menuconfig, selecting both Temac and SystemACE and other basic
options. Then make dep and make zImage. During this process, I need to
modify some little problems which are about the inclusion of some 

header

quoted

files, or specify some lib inclusion directories instead. Then that
problem appears. There are some main points: 1. configured for ml403
board. 2.both Temac and SystemACE are selected. 3. 5 patches for Temac
and 1 patch for SystemACE. 4. linux version is 2.6.17 or 2.6.16. I
really have no idea why this still happens after your modification. So 

I

quoted

have to ask you again.

quoted

Ofcourse, I can work my way to compile the driver. But is there any 

doc.

quoted

quoted

present explaining this?

Sorry that there is no doc to explain this. I just did following the
procedure described above. I am totally lost. The strange thing is, 

when

quoted

I select only one of these two drivers, no problem, but if both, 

problem.

quoted

By the way, I noticed that in the address where I get your patch, there
is also a patch called linuxppc-2.6.17.1-sysace-1.0.patch which is much
larger than the 1.1 one. I needn't apply the 1.0 one, right?
Thanks for your hard work. Hopefully we can solve the problem.
Regards
Ming

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn