Re: Re: Failed to initialize the ethernet on PPC4 40GP
From: Denny <hidden>
Date: 2006-07-10 11:41:50
Sorry, It is the UBoot question, I will address this to the UBoot maillist the next time! After I add the environment valiable "ipaddr", this message disappeared,but the ethernet still not work (the MII on my custom board work on RMII mode). u-boot => tftp 0x100000 u-boot.bin miiphy_register: non unique device name 'ppc_4xx_eth0' PHY speed read failed, assuming 10bT PHY duplex read failed, assuming half duplex ENET Speed is 10 Mbps - HALF duplex connection TFTP from server 192.168.65.235; our IP address is 192.168.65.239 Filename 'u-boot.bin'. Load address: 0x100000 Loading: T T T T T T T T T T Retry count exceeded; starting again - Denny