RE: SIU_INT_IRQ4 in MPC 8260

Are you sure the IRQ4 line is generating irqs?  Did you measure the line
using an oscilloscope?

Best Regards,
Leo

-----Original Message-----
From: linuxppc-embedded-bounces+leoli=3Dfreescale.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+leoli=3Dfreescale.com@ozlabs.org] On

Behalf

Of jagannathanjay@aim.com
Sent: Friday, July 07, 2006 5:05 PM
To: linuxppc-embedded@ozlabs.org
Subject: SIU_INT_IRQ4 in MPC 8260
=20
Hi all
=20
I am trying to set up a interrupt handler for SIU_INT_IRQ4.
=20
The target I am using is MPC 8260 , emmbedded planet Evaluation board.
=20
The OS is Embedded Linux .

------------------------------------------------------------------------
-

------------
void my_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs)
{
=20
 printk("*********** \n");
=20
}
=20
=20
 if( request_irq(SIU_INT_IRQ4,my_interrupt_handler,0,0,0) < 0)
 {
     printk("\n unable to register the interrupt handler \n");
 }
=20

------------------------------------------------------------------------
-

------------
=20
But my_interrupt_handler isn't getting called .
=20
Can anyone help me to fix this problem
=20
Regards
Jagan
=20
=20
=20
=20
=20

________________________________________________________________________

Check Out the new free AIM(R) Mail -- 2 GB of storage and
industry-leading spam and email virus protection.
=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded