RE: No ttyS device at I/O port 0xfe004500 for console

On Jun 13, 2006, at 11:48 AM, Alex Zeffertt wrote:

quoted

Hi list,

I'm trying to boot a linux-2.6.11 kernel on a MPC83xx based 

board.   

quoted

Through
some experimentation I have found I need 

"console=uart,io,0xfe004500"

quoted

in the kernel command line in order to get any output over 

the serial 

quoted

port.

Half way through initialisation the kernel appears to swap from its 
"early"
8250 serial driver to a "full" 8250 serial driver.  At this 

point it 

quoted

prints "No ttyS device at I/O port 0xfe004500 for console" 

and there 

quoted

is no further output.

Does anyone have any idea what I may be doing wrong?

BTW, here's the output that I do get.

Alex, where did you get this 2.6.11 kernel?  The public tree 
didn't have support for 83xx in 2.6.11.  I'd suggest looking 
at using something newer like 2.6.16 and see if you have the 
same issue.

I suspect he got from the same place I did, freescales LTIB dev. env.
which has been patched to support 832x. I am having the same problem as he
has, any info on what the problem might be would be great.

Also, if anyone has any info on when these patches will be sent upstream, I 
sure would like to hear about it.

 Jocke