I'm experiencing the following error with a BDI 2000 connected to the
JTAG port on a A&M Rattler 8250 board.  I was wondering if this is a
hardware problem, or if I have the wrong configuration set up.  The
following are a telnet session transcript, the BDI configuration file,
and the register configuration file.

Thanks

BDI Telnet Session Transcript (repeats endlessly):

- TARGET: processing user reset request
*** TARGET: resetting target failed
# PPC: unexpected response from target
- TARGET: target will be restarted in 10 sec

rattler8250pci.cfg:

;bdiGDB configuration file for rattler
; ------------------------------------------------------
;
[INIT]
;WREG    MSR             0x00001002      ; set up MSR
;WSPR    1008            0               ; turn off caches

 === > > WM32    0x000101A8      0x00f00000      ; IMMR == 0xFF000000

Type, or are you setting IMMR to 0xf0000000 ?