RE: Routing problem

Antonio,

Try this:

  sysctl net.ipv4.ip_forward=3D1=20

Regards,=20
Steve Yang
510-749-4535 Alameda
AIM: steveyang4535

-----Original Message-----
From: linuxppc-embedded-bounces+syang=3Dwindriver.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+syang=3Dwindriver.com@ozlabs.org] On
Behalf Of Antonio Di Bacco
Sent: Friday, May 12, 2006 1:53 PM
To: linuxppc-embedded@ozlabs.org
Subject: Routing problem

Hi all,

I have a board with an MPC880 using the tow FECs as two ethernet
interfaces. I tried to enable the ip forwarding with no success. I have
issued  "echo 1=20

/proc/sys/net/ipv4/ip_forward", is it sufficient to make Linux work as

a

router?

Bye,
Antonio.=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded