[PATCH] powerpc: whitespace cleanup in reg.h

In reg.h we mostly have #define<space> but there are a few #define<tab>
around.  Clean these up so we use space exclusively.

Signed-off-by: Michael Neuling <redacted>

---
It's clear this patch is fundamental to our future prosperity!  

 include/asm-powerpc/reg.h |   46 +++++++++++++++++++++++-----------------------
 1 files changed, 23 insertions(+), 23 deletions(-)

Index: linux-2.6-powerpc/include/asm-powerpc/reg.h
===================================================================

--- linux-2.6-powerpc.orig/include/asm-powerpc/reg.h
+++ linux-2.6-powerpc/include/asm-powerpc/reg.h

@@ -153,7 +153,7 @@
 #define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
 #define   DABR_TRANSLATION	(1UL << 2)
 #define SPRN_DAR	0x013	/* Data Address Register */
-#define	SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
 #define   DSISR_NOHPTE		0x40000000	/* no translation found */
 #define   DSISR_PROTFAULT	0x08000000	/* protection fault */
 #define   DSISR_ISSTORE		0x02000000	/* access was a store */

@@ -258,16 +258,16 @@
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #define SPRN_HID4	0x3F4		/* 970 HID4 */
 #define SPRN_HID5	0x3F6		/* 970 HID5 */
-#define	SPRN_HID6	0x3F9	/* BE HID 6 */
-#define	  HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
-#define	  HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
-#define	SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
-#define	  TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
-#define	  TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
-#define	  TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
-#define	  TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
-#define	SPRN_TSC 	0x3FD	/* Thread switch control on others */
-#define	SPRN_TST 	0x3FC	/* Thread switch timeout on others */
+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */
 #if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
 #define SPRN_IAC1	0x3F4		/* Instruction Address Compare 1 */
 #define SPRN_IAC2	0x3F5		/* Instruction Address Compare 2 */

@@ -362,7 +362,7 @@
 #endif
 #define SPRN_PTEHI	0x3D5	/* 981 7450 PTE HI word (S/W TLB load) */
 #define SPRN_PTELO	0x3D6	/* 982 7450 PTE LO word (S/W TLB load) */
-#define	SPRN_PURR	0x135	/* Processor Utilization of Resources Reg */
+#define SPRN_PURR	0x135	/* Processor Utilization of Resources Reg */
 #define SPRN_PVR	0x11F	/* Processor Version Register */
 #define SPRN_RPA	0x3D6	/* Required Physical Address Register */
 #define SPRN_SDA	0x3BF	/* Sampled Data Address Register */

@@ -559,20 +559,20 @@
 
 /* 64-bit processors */
 /* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
-#define	PV_NORTHSTAR	0x0033
-#define	PV_PULSAR	0x0034
-#define	PV_POWER4	0x0035
-#define	PV_ICESTAR	0x0036
-#define	PV_SSTAR	0x0037
-#define	PV_POWER4p	0x0038
+#define PV_NORTHSTAR	0x0033
+#define PV_PULSAR	0x0034
+#define PV_POWER4	0x0035
+#define PV_ICESTAR	0x0036
+#define PV_SSTAR	0x0037
+#define PV_POWER4p	0x0038
 #define PV_970		0x0039
-#define	PV_POWER5	0x003A
+#define PV_POWER5	0x003A
 #define PV_POWER5p	0x003B
 #define PV_970FX	0x003C
-#define	PV_630		0x0040
-#define	PV_630p	0x0041
-#define	PV_970MP	0x0044
-#define	PV_BE		0x0070
+#define PV_630		0x0040
+#define PV_630p	0x0041
+#define PV_970MP	0x0044
+#define PV_BE		0x0070
 
 /*
  * Number of entries in the SLB. If this ever changes we should handle

In reg.h we mostly have #define<space> but there are a few #define<tab>
around.  Clean these up so we use space exclusively.

Signed-off-by: Michael Neuling <redacted>

nack

+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */

OK, the tab to space for lines like SPRN_HID6 I understand.  But then you seem to be 
trying to do indenting with 3 spaces instead of tabs.  And your values don't line up, and 
your comments don't line up.

I'm just saying, either fix the formatting right or don't fix it at all.  Moving it from 
one ugly to another ugly is not worth the trouble.

But then you seem to be trying to do indenting with 3 spaces instead of tabs.

I disagree.  These used to be #define<tab><space><space>.  I just
changed them to #define<space><space><space>.

And your values don't line up, and your comments don't line up.

Try applying the patch and looking at reg.h.  It looks much different
there than in the patch.  

I'm just saying, either fix the formatting right or don't fix it at
all.  Moving it from one ugly to another ugly is not worth the trouble.

With 8 character tabs, I've not changed to look at all.  

Mikey

On Tue, 2006-05-09 at 13:34 -0500, jschopp wrote:

quoted

+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */

OK, the tab to space for lines like SPRN_HID6 I understand.  But then you seem to be 
trying to do indenting with 3 spaces instead of tabs.  And your values don't line up, and 
your comments don't line up.

The SPR numbers are indented one space. The values for each SPR follow
the SPR definition, and are indented two spaces past that. It's not
unreasonable.

I don't really care about the values or comments, but if other people do
then please use spaces for formatting (and tabs only for indenting).

-Hollis

On Tue, May 09, 2006 at 01:34:36PM -0500, jschopp wrote:

quoted

+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */

OK, the tab to space for lines like SPRN_HID6 I understand.  But then you seem to be 
trying to do indenting with 3 spaces instead of tabs.

It's what the rest of the file uses. It might not correspond to
CodingStyle, but it makes it easy to read.

(Now, I'm not sure it's a good idea to define the meanings of HID bits
in the global register include, but that's unrelated to the whitespace
cleanup Mikey did.)


-Olof