Re: Freescale 8272ADS configuration

Carlos,

You need to load u-boot using the following BDI2000 config file:

	ftp://ftp.denx.de/pub/BDI2000/MPC8260ADS.cfg

u-boot itself needs to be configured with 
	
	make  MPC8272ADS_config

before it is built.

The kernel needs to be configured with

	make ads8272_config && make oldconfig

before it is built.

And most importantly you should read the user manual on 

	http://www.denx.de/wiki/DULG/Manual

It's a bit 8xx centric but most of it applies to the 82xx as well.

Alex


On Wed, 12 Apr 2006 18:22:33 -0700
Carlos Munoz [off-list ref] wrote:

Hi all,

I have a new Freescale 8272ADS board that I need to load uboot and
linux on. I have read all the documentation that came with the board
but unfortunately it doesn't explain how to bring up the board from
scratch. Does anyone know what I need to do to load uboot and linux
on this board ?

Thanks,


Carlos
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded