Laurent,

Take a look at the 2.4 http://www.denx.de kernel, it has NAND and jffs2
support.

Jaap-Jan

On 11-apr-2006, at 18:31, Laurent Lagrange wrote:

Hello,

I work on a custom 82xx board with a NAND flash :
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND  
128MiB 3,3V
8-bit)

I have to KEEP a Linux 2.4 and can't migrate to a Linux 2.6 for  
this board.

This type of NAND flash and JFFS2 work fine with a Linux 2.6 but  
with a
Linux 2.4,
this is a little tricky :
Linux 2.4.18 or 2.4.25 do not support this device,
Linux 2.4.31 seems supporting this device but JFFS2 is not adapted,
Linux 2.4.32 does not support this device anymore.

On www.linux-mtd.infradead.org, it seems that Linux 2.4 is no more
supported.

Any help would be welcome
Thanks
Laurent


_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
This message has been scanned for viruses and is believed to be clean

____
J.G.J. Boor                       Anton Philipsweg 1
Software Engineer                 1223 KZ Hilversum
AimSys bv                         tel. +31 35 689 1941
Postbus 2194, 1200 CD Hilversum   jjboor at aimsys dot nl