Using modem signal in cpm2 uart for MPC8270

Started by Mathieu Deschamps on Feb 17, 2006

open the first message on its own page

Message details and related content
Hello ppc-embedded folks,

I'am looking for a hint in arch/ppc/cpm2_io/uart.c on enable modem signal 
handling on MontaVista Linux 2.4.20. I know it's a bit ancient but some of
you may have a good memory :) I mentionned enabling modem signal because this 
file seems to support modem, yet I come to the conclusion it is incomplete.  

In void rs_8xx_interrupt function I've noticed it needs 'modem_control' 
defined to get the call done and modem lines changed on interrup(1). Also it 
needs defined 'notdef' to implement this code(2).

===(1)
#ifdef modem_control
        check_modem_status(info);
#endif
===(2)
#ifdef notdef
        /* I need to do this for the SCCs, so it is left as a reminder.
        */
static _INLINE_ void check_modem_status(struct async_struct *info)
{
 [...]
}
#endif
===

Having this done is not sufficient, a lot of registers defined in 
linux/serial_reg.h are reported missing. I have included this file, yet
other functions are missing, struct members also. 
Here is compilation output :
===========================
uart.c: In function `check_modem_status':
uart.c:603: warning: implicit declaration of function `serial_in'
uart.c:638: error: structure has no member named `tqueue_hangup'
uart.c:650: warning: implicit declaration of function `serial_out'
uart.c:651: warning: passing arg 1 of `rs_sched_event' from incompatible 
pointer type
uart.c: In function `rs_8xx_interrupt':
uart.c:709: warning: passing arg 1 of `check_modem_status' from incompatible 
pointer type
uart.c: In function `startup':
uart.c:813: error: structure has no member named `MCR'
uart.c:815: error: structure has no member named `MCR'
uart.c: In function `change_speed':
uart.c:993: error: structure has no member named `IER'
uart.c:995: error: structure has no member named `IER'
uart.c:998: error: structure has no member named `IER'
uart.c:1005: error: structure has no member named `IER'
uart.c:1007: error: structure has no member named `IER'
uart.c: In function `rs_8xx_throttle':
uart.c:1255: error: structure has no member named `MCR'
uart.c:1258: error: structure has no member named `MCR'
uart.c: In function `rs_8xx_unthrottle':
uart.c:1284: error: structure has no member named `MCR'
uart.c:1286: error: structure has no member named `MCR'
uart.c: In function `get_modem_info':
uart.c:1327: error: structure has no member named `MCR'
uart.c: In function `set_modem_info':
uart.c:1358: error: structure has no member named `MCR'
uart.c:1360: error: structure has no member named `MCR'
uart.c:1363: error: structure has no member named `MCR'
uart.c:1365: error: structure has no member named `MCR'
uart.c:1370: error: structure has no member named `MCR'
uart.c:1372: error: structure has no member named `MCR'
uart.c:1375: error: structure has no member named `MCR'
uart.c:1377: error: structure has no member named `MCR'
uart.c:1381: error: structure has no member named `MCR'
uart.c:1381: error: structure has no member named `MCR'
uart.c:1398: error: structure has no member named `MCR'
uart.c: In function `begin_break':
uart.c:1417: warning: comparison is always false due to limited range of data 
type
uart.c: In function `end_break':
uart.c:1461: warning: comparison is always false due to limited range of data 
type
uart.c: In function `rs_8xx_ioctl':
uart.c:1600: error: `cprev' undeclared (first use in this function)
uart.c:1600: error: (Each undeclared identifier is reported only once
uart.c:1600: error: for each function it appears in.)
uart.c:1603: error: structure has no member named `delta_msr_wait'
uart.c: In function `rs_8xx_set_termios':
uart.c:1670: error: structure has no member named `MCR'
uart.c:1672: error: structure has no member named `MCR'
uart.c:1679: error: structure has no member named `MCR'
uart.c:1682: error: structure has no member named `MCR'
uart.c:1685: error: structure has no member named `MCR'
uart.c: In function `rs_8xx_wait_until_sent':
uart.c:1839: warning: unused variable `lsr'
=======

I wonder if modem support is incomplete or even if it was dropped in here but 
was conceived for another arch . 

Looking forward to read your inputs.


Best regards,
 

Mathieu Deschamps
 
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help